Magnavox 1VMN26713A owner manual Channel Setting, Adding / Deleting Channels

CHANNEL SETTING

Adding / Deleting Channels

You may want to add or delete TV channels if your	6	Use [K / L] to select “Add” or
channel lineup changes or if you no longer watch some		“Delete”, then press [OK].
channels.
Adding channel is only available for the analog TV
			CH 2
channels.				Add
Make sure
				Delete

• You perform “Auto Channel Scan” before adding or	Your setting will be activated and it will
deleting the channels.
	automatically switch to the next channel so that
	you can continue adding or deleting channels.

Introduction Connections

1Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add/delete channels.

2Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

“General Setting” menu will appear.

3 Use [K / L] to select “Channel”, then press [OK].

“Channel” menu will appear.

4Use [K / L] to select “Manual Channel

Preset”, then press [OK].

Auto Channel Preset

Manual Channel Preset

TV Audio Select

• If you are adding or deleting Analog Cable TV

channels, go to 5 ANALOG to continue.

•If you are deleting Digital TV channels, go to 5

DIGITAL to continue.

ANALOG

5Select the channel number to add or delete.

•Use [CHANNEL / ] to cycle through only the memorized channels.

•Use [{ / B] to cycle through all the channels including the ones not memorized.

•Use [the Number buttons] to select a channel directly.

•When a memorized channel is selected, “Add” is checked and highlighted as a default.

•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.

7Press [SETUP] to exit.

DIGITAL

5Select the channel number to delete.

•Only the major channel is displayed in “Manual Channel Preset” menu. (The channel number displayed in the parenthesis is a virtual channel number)

•Use [CHANNEL/ ] to cycle through only the memorized channels.

•You cannot use [{ / B] for the digital TV channel selection.

•Use [the Number buttons] to select a channel directly.

•When a memorized channel is selected, “Add” is checked and highlighted as a default.

•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.

6Use [K / L] to select “Delete”, then press [OK]. Then select the next channel to delete.

•If the setting is complete, press [RETURN] to activate “Manual Channel Preset”.

DTV 2 (CH - - - )

Add

Delete

Your setting will be activated.

WARNING:

•For the digital TV channels, you cannot recover the deleted channels once they are deleted unless you perform the auto channel preset again.

7Press [SETUP] to exit.

Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español

EN 29