Magnavox 1VMN26713A When you finish with the setting, press Setup to exit, Format Default RGB

SETUPS

HDMI

1Press [SETUP] in stop mode and use [K / L] to select “General Setting”, then press [OK].

2Use [K / L] to select “HDMI”, then press [OK].

General Setting

Playback

Display

Video

Recording

Clock

Channel

HDMI

Reset All

•You cannot select HDMI when an HDMI cable is not connected and the items are shown in grey color.

3Use [K / L] to select a desired item, then press [OK].

1 Format

2HDMI Audio

3 RGB Range

4When you finish with the setting, press [SETUP] to exit.

1 Format (Default : RGB)

You can select the color space for HDMI output.

Set the appropriate color space for your display device.

Use [K / L] to select a setting, then press [OK].

•When the connected device is not compatible with the Y/Cb/Cr, HDMI signal is output as RGB regardless of the setting.

Format

RGB

YCbCr

Your setting will be activated.

2 HDMI Audio (Default : ON)

If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUT jack to your audio system, etc.), you can set the HDMI audio output off.

Use [K / L] to select a setting, then press [OK].

• Set to “OFF” when the HDMI sound is not output.

HDMI Audio

ON

OFF

Your setting will be activated.

3 RGB Range (Default : Normal)

You can adjust the RGB range to make the dark areas of the HDMI images brighter.

Use [K / L] to select a setting, then press [OK].

•Select “Enhanced“ if the black-white contrast is not clear.

•This setting is effective only for HDMI RGB output.

RGB Range

Normal

Enhanced

Your setting will be activated.

92 EN