Magnavox 1VMN26713A owner manual Setting Chapter Marks, Use K/ L to select Add, then press OK

F

NOV/21/09 11:00AM CH12 SP

1 : 05 : 00

A new chapter mark will be added.

6 Press [RETURN] twice to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

EDITING DISCS

Setting Chapter Marks

You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature.

1Follow steps 1 to 3 in “Deleting a Title” on page 71 to display “Edit” menu.

2 Use [K / L] to select “Chapter Mark”, then press [OK].

Submenu will appear.

3Press [PLAY B] and then [PAUSE F] to decide the point at which you will create a new chapter mark.

•It is convenient to use [H], [G],

[E] and [D] for finding the point to add a new chapter mark.

4Use [K/ L] to select “Add”, then press [OK].

Edit - Chapter Mark

1Add Delete

Delete All

Chapter 2/ 3

Introduction Connections Basic Setup Recording Playback

NOV/21/09 11:00AM CH12 SP

1 : 05 : 00

Note

•When the number of chapter marks in a title is 99 and the number of chapter marks in a disc is 254, chapter marks cannot be added.

•Besides the above-mentioned, it is not likely to be able to add according to recorded time and number of chapters.

•Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents.

5Use [K/ L] to select “Yes”, then press [OK].

Edit - Chapter Mark - Add

1Yes No

Chapter 2/ 3

EN 73

Editing Function Setup VCR Functions Others

Español