Setting the video channel/Setting the language

Setting the video channel/Setting the language

Setting the Video Channel

To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel).

When a TV is connected with the 75 ohm coaxial cable only.

1 Press and hold 3 or 4 on the remote for 3 seconds in standby mode. The video channel will start to flash

for 3 seconds in the display window. 2 Press POWER to turn on the DVD/VCR.

3 Slide TV/VCR/DVD switch to VCR/DVD. Then press VCR to select the VCR mode. The VCR indicator on the front panel will light.

4 Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 1.

5 Press TV/VCR to select the VCR position.

The VCR indicator will appear in the display window.

6 Select any channel to receive a TV station in your area. The channel number will appear on the screen for about 4 seconds.

For a push-button TV tuner

If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner's manual for details.

Setting the language

You can choose from three different languages (English, French and Spanish) for the on-screen displays.

NOTES:

• If the unit does not operate properly,

or No key operation (by the unit and/

or the remote control): Static electric-

ity, etc., may affect the player's opera-

tion. Disconnect the AC power cord

1 Press SET UP MENU.

The VCR menu screen will appear. Press or to select “SYSTEM SETUP”, then press ENTER.

If you use the unit for the first time and press SET UP MENU, instead of the main menu screen on the right the “SYSTEM SETUP” menu screen in step 2 may appear.

2 Press or to select the “LANGUAGE” option, then press