Special playback
Picture Search
Reverse picture search function
Press REW x 1 or x 2 during the playback.
Forward picture search function
Repeat playback
The entire video tape will be played until its end.The tape will then automatically rewind to the beginning and the playback will be repeated.
Press FF x 1 or x 2 during the playback.
To return to playback: Press PLAY.
Still Picture
Press PAUSE during playback. To resume normal playback: Press PLAY.
Slow Motion
During playback press SLOW.
1 Press SET UP MENU. Press or to select “AUTO REPEAT”.
2 Then press ENTER to select “ON” or “OFF”. If “ON” is selected, the playback will be repeated endlessly.
| MENU |
|
|
| TIMER REC SET | ON | OFF |
| |||
| AUTO REPEAT | ||
| |||
| SAP | ON | OFF |
| |||
| CH SETUP |
|
|
|
|
| |
| SYSTEM SETUP |
|
|
|
|
| |
|
| ||
| MENU |
|
|
| TIMER REC SET | ON | OFF |
| |||
| AUTO REPEAT | ||
| |||
| SAP | ON | OFF |
| |||
| CH SETUP |
|
|
|
|
| |
| SYSTEM SETUP |
|
|
|
|
|
To return to playback: Press PLAY or SLOW.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion, press the SET + or
If the still picture jitters excessively, press SET + or – to stabilize the still picture.
Frame by Frame picture
Press PAUSE during playback.
Press SLOW one by one: The picture advances frame by frame.
To return to playback: Press PLAY or PAUSE.
Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during playback, press SET
•Press A.TRK to reactivate automatic tracking again. “AUTO TR.” will appear.
NOTES:
•The audio output is muted during SPEED SEARCH, STILL, FRAME ADVANCE and SLOW MOTION.
•During picture search mode there will be noise bars which are caused by the system.
•The Special Playback will automatically change to playback after approx. 5 minutes to protect the video tape against excessive wear.
28
3 Press SET UP MENU until the menu screen is cleared.
If you press OSD, “ ” will appear on the screen.
4 To start the playback, press PLAY.
The playback will be repeated endlessly.
To cancel repeat mode:
Follow the above step 1, then press ENTER to select the “OFF” position. Press SET UP MENU to return to the TV.
Skip Search
Each time you press SKIP SEARCH while a tape is playing, the unit will
For example: 1 press: 30 seconds of tape 2 presses: 60 seconds of tape 3 presses: 90 seconds of tape