Auto clock setting
The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel
signal.Preparation:
•You must set the antenna connection before the AC cord plug is inserted into the AC outlet.
•Make sure the AUTO CH MEMORY (on page 21) is done.
Auto clock setting
WAIT 30 MINUTES! when the power switch is off, after the
connections of the antenna and the power plug. Because the Auto Clock setting feature is activate.
After the clock is set automatically, you may have to set the Time Zone and Daylight Saving Time.
Press POWER to turn on the DVD/VCR after the Auto Clock operation completed.
• When shipped from factory, the AUTO CLOCK option is set to ON position.
• The Auto Clock setting will be performed at 6:00 AM, 12:00 PM and
6:00 PM everyday when the DVD/VCR is turned off.
If you turn the DVD/VCR on during Auto Clock setting, the clock is not set.
• With cable box connection, if the Auto Clock Setting is unsuccessful, please select the PBS channel carrying the XDS information, then turn
the DVD/VCR off. After 30 minutes, turn the DVD/VCR on, and if the clock is not set automatically, set the clock manually (see page 25).
Canadian Viewers:
Please see note regarding the Auto Clock setting option on page 62.
Time Zone setting (STANDARD TIME)
In the rare event that you live within broadcast range of two
stations in two different time zones, the DVD/VCR may recognize
the wrong station for the Auto Clock setting.
To correct the situation:
Preparation:
• Turn ON the TV.
• When a TV is connected with an audio/video cable, select the video input mode on the TV.
• When a TV is connected only with an antenna cable, set to the
video channel 3 or 4. Then select VCR position with TV/VCR.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then
press VCR to select the VCR mode. (The VCR indicator will light.)
NOTES:
•After Auto Clock setting, in some case the clock may display the other time zone’s. You can correct the clock by selecting your Time Zone setting above.
•When the clock is not set or you set the clock manually, Time Zone setting is not available.
1 Press SET UP MENU. The VCR menu screen will appear.
| Press | or | to select the “SYSTEM SETUP” menu, then | ||||
2 | press ENTER. |
|
|
|
|
| |
Press | or | to select the |
| CLOCK SET |
|
| |
| “STANDARD TIME” option, then | SYSTEM SETUP |
|
| |||
|
| LANGUAGE/IDIOMA/LANGUE | |||||
|
| ||||||
|
| ||||||
| press ENTER. |
|
| NO NOISE BACKGROUND | |||
|
|
|
|
| |||
|
|
|
|
|
| ON | OFF |
|
|
|
|
| AUTO CLOCK | ON | OFF |
|
|
|
|
| |||
|
|
|
|
| STANDARD TIME |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| DAYLIGHT SAVING TIME | ||
|
|
|
|
| |||
|
|
|
|
|
|
| |
3 | Press | or | to select your Time | STANDARD TIME |
|
| |
|
|
| |||||
| Zone, then press the ENTER. |
|
| ||||
|
| ATLANTIC | EASTERN | ||||
|
|
|
|
| |||
|
|
|
|
| CENTRAL | MOUNTAIN | |
|
|
|
|
| PACIFIC | ALASKA | |
HAWAII
AUTO
4 Press SET UP MENU until the MENU screen is cleared.
23