JVC HR-XVC25U manual Recording a TV program, Recording and viewing the same TV program

CH 110

Recording a TV program

Recording and viewing the same TV program

NOTES:

•If the erase prevention tab is removed, the tape will eject when both the REC and PLAY are pressed for recording.

•If you wish to watch the DVD playback during the normal recording on VCR, press DVD to change to DVD mode and perform the DVD playback (see page 39).

Preparation:

•Turn ON the TV and set it to the video input mode.

•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light.)

1 Load a cassette tape with the erase prevention tab intact.

The VCR will automatically turn on.

2 Press SP/EP to select the desired tape
speed SP or EP.
The tape counter and “SP” or “EP” will
appear on the screen for about 4
seconds.	00 : 00 : 00 SP

3 Set21).the TV/CATV option to the appropriate position (see page

TV - VHF/UHF channels CATV - CABLE TV channels

4 Press Number keys or VCR CH +/–to select the channel to be recorded.

1-9 Press 0 twice and then 1-9as required. Example: To select 2, Press “002”.

10-12 Press 0 first and then the remaining 2 digits in order from left to right.

Example: Press 012 for “12”. 13-99 Press 2 digits in order.

Example: Press 22 for “22”. 100-125 Press the 3 digits in order.

Example: Press 110 for “110”.

VHF/UHF/CATV CHANNELS

TV	CATV
VHF	VHF
2-13	2-13
UHF	STD/HRC/IRC
14-69	14-36		(A) (W)
	37-59 (AA) (WW)
	60-85	(AAA) (ZZZ)
	86-94		(86) (94)
	95-99	(A-5) (A-1)
	100-125		(100)(125)
	01		(5A)

On the VCR, press REC.
5 Or on the Remote, while holding REC,	CH 110
press PLAY.
“ ” will appear on the screen for
about 4 seconds and “REC” will	INDEX
appear on the display.

30