JVC HR-XVC25U manual Recording a TV program

Recording a TV program

Auto Rewind feature

This VCR will automatically rewind the tape when the tape has ended (except during ITR and TIMER REC). It will also eject the tape.

To stop recording

Press STOP to stop recording.

“ ” will appear on screen for about 4 seconds.

To stop recording temporarily

Press PAUSE to avoid recording unwanted material. Press again to continue the recording.

“” will appear on screen for about 4 seconds.

NOTES:

•The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The VCR will change to the STOP mode.

•You can select a recording channel in the recording pause mode.

Recording one program while watching another

While the VCR is recording, press TV/VCR to select the TV position. The “VCR” will go off and recording will continue.

Select the TV channel you want to watch by using the TV channel selector. If the connected TV is JVC’s, use TV CH +/–after slide TV/ VCR/DVD switch to TV.

NOTE:

Some CATV hookups do not permit viewing one channel while recording another. See pages 16,17.

To Display VCR operation Status

Press OSD. The clock, day of the week and more information will be indicated.

While watching TV

DAY OF THE WEEK

CLOCK		CHANNEL
8 : 47AM MON	CH 125
STEREO SAP
STEREO AND
SEPARATE AUDIO
PROGRAM (SAP)		TAPE SPEED
	00 : 00 : 00 SP

REAL TIME COUNTER

While operating a tape

OPERATING

HI-FI STEREO	8 : 30AM MON		MODE
	HI - FI
			AUTO REPEAT
OUTPUT SELECTION	STEREO		TAPE IN
		00 : 00 : 00 SP

To cancel the display: Press OSD until all indicators disappear.

31