VCR Setup (Continued)
The VCR Setup Menu
1 Press VCR, then press SETUP/MENU to display the MAIN menu.
2 Press 3 or 4 to select the VCR SETUP menu, then press ENTER.
The VCR SETUP menu will appear.
SET CLOCK |
|
| |
TIMER RECORD | SCREEN DISPLAY: | ON | |
LANGUAGE: |
| ||
|
|
| |
CHANNEL SETUP | AUDIO MODE: |
| |
BROADCAST TYPE: |
| ||
|
|
| |
VCR SETUP | AUDIO OUTPUT: |
| |
SELECT | ENTER | SELECT | ADJUST |
TO EXIT PRESS |
| TO EXIT PRESS |
|
3VCR SETUP menu. Then press 1 or 2 to choose a desired setting.Press 3 or 4 to choose a desired item on the
SCREEN DISPLAY
The
LANGUAGE
The
The LANGUAGE is switched among ENGLISH, SPANISH and FRENCH by pressing 1 or 2.
AUDIO MODE
The VCR has two separate audio playback systems, the high quality VHS
The VHS
The AUDIO MODE is switched between
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO position. The VCR will then record a STEREO program when available, and record a mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasting, changing the display to mono may give clearer sound.
The BROADCAST TYPE is switched among STEREO, SAP, and MONO by pressing 1 or 2.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE
This display setting should normally be in the stereo position, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.
The AUDIO OUTPUT is switched among STEREO, LEFT, and RIGHT by pressing 1 or 2.
Channel Selection
This VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels
Preparation:
Connect the VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 12.
AUTO CHANNEL PROGRAMMING
1 Press SETUP/MENU and the MAIN menu will appear.
2 Press 3 or 4 to select the CHANNEL SETUP menu, then press ENTER.
The CHANNEL SETUP menu will appear.
SET CLOCK |
| ||
TIMER RECORD | AUTO CHANNEL SEARCH | ||
CHANNEL SOURCE: | |||
|
| ||
CHANNEL SETUP | ADD/DEL CH: | ||
INPUT SELECT: | |||
|
| ||
VCR SETUP |
| ||
SELECT | ENTER |
| |
TO EXIT PRESS |
|
| |
3then press 1 or 2 to select TUNER.
Press 1 or 2 repeatedly to switch among TUNER, LINE1 and LINE2.4 to choose the INPUT SOURCE item,Press
4item, then press 1 or 2 to set the channel. The tuner will automatically cycle through all
available channels in the area and place them in the tuner’s memory.3 or 4 to choose the AUTO CHANNEL SEARCHPress
5make sure the CHANNEL SOURCE is set appro- priately (TV or CATV) by pressing 3 or 4 and choosing the correct CHANNEL SOURCE (TV or CATV) by pressing 1 or 2 using the CHANNEL
SETUP menu.
Remember, TV is for off the air antenna reception, CATV is for cable TV connection.After the AUTO CHANNEL SEARCH is complete,
6Press SETUP/MENU to return to the TV screen.
7cycle the VCR through the channels in memory.Use CH(▲/▼) or CH (▲/▼) on the front panel to
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels from memory manually.
1Press 4 to choose the ADD/DEL CH item on the CHANNEL SETUP menu. Press 1 or 2 to select a channel to add or erase.
2Press ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels.
3Press SETUP/MENU to return to the TV screen.
16