GoVideo DVD/VCR Combo manual VHS Hi-FI Stereo System MTS Broadcast, MTS Multi-Channel TV Sound

VCR Operation (Continued)

VHS Hi-FI Stereo System/

MTS Broadcast

This VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The information below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode.

MTS (Multi-Channel TV Sound)

This VCR will decode MTS stereo and bilingual (SAP) off-the-air broadcast sound signals. It also decodes stereo TV sound from local cable companies, as long as they operate on assigned cable frequencies and use the EIA-recommended MTS stereo/bilingual TV sound sys- tem.

Playback with Hi-Fi Stereo Audio Sound

A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for true stereo playback. To experience the full and rich stereo sound available with Hi-Fi recorded tapes, we recommend the connection of this unit to a home stereo audio system.

Set the AUDIO MODE item to HI-FI on the VCR

1 SETUP menu .

2position.

(STEREO) POSITION: The left channel sound (L) is heard from the left speaker and the right channel soundSet the AUDIO OUTPUT item to STEREO

(R) is heard from the right speaker.

(LEFT) POSITION: The left channel sound (L) is heard from both speakers.

(RIGHT) POSITION: The right channel sound (R) is heard from both speakers.

Insert a cassette and press PLAY.

3 Adjust volume at your stereo system.

Multichannel TV Sound Indicator (MTS)

Shows On-screen as illustrated below when ENTER is pressed.

One or both of the indicators will light, depending on the MTS broadcast.

If only the STEREO appears on the TV screen.

The VCR can record in stereo onto the VHS Hi-Fi audio tracks when the BROADCAST TYPE item is in the STEREO position. The VCR will also record mono audio onto the mono audio track.

If only the SAP appears on the TV screen.

Select the BROADCAST TYPE item to SAP.

If both the STEREO/SAP appears on the TV screen

Use the BROADCAST TYPE item to select the desired record- ing mode (STEREO or SAP).

SAP (Second Audio Program) Recording

Some stations transmit a Second Audio Program, which is used for a second language or additional information. When the station broadcasts a Second Audio Program, follow the procedure below to record the SAP.

1 Insert a video cassette that the safety tab is in place.

2SETUP menu).

Do this if only the SAP appears on the TV screen or you know the program will use the SAP.Set the BROADCAST TYPE item to SAP (VCR

3 Set the desired recording speed (SP or EP) by pressing SP/EP.

4 Select the desired channel. The SAP should appear on the TV screen.

Press REC once

5 You are now recording the program you see and hear on the TV.

6Press STOP to stop recording.