GoVideo DVD/VCR Combo manual Precautions, About Symbols

Page 7

Before Use (Continued)

Precautions

Handling the unit

When shipping the unit

Retain your original shipping carton and packing materi- als. For maximum protection, re-pack the unit as it was originally packaged at the factory.

When setting up the unit

The picture or sound of nearby electrical equipment may cause distortion during playback. When this occurs, position the unit away from the interfering devices, or turn off the unit after removing the disc.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. They may leave marks on the surface.

Cleaning the unit

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

To obtain a clear picture

The DVD+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor.

Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.)

For details, please contact your nearest dealer.

Notes on Discs

Handling discs

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not get on the surface.

Do not stick paper or tape on the disc.

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- light.

Cleaning discs

Fingerprints and dust on the disc can cause poor pic- ture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the cen- ter out.

Yes No

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

Cleaning the Video Heads

Playing poor quality or damaged tapes can contaminate the video heads. Use only high quality tapes in your DVD+VCR. Dirt which accumulates on the video heads may cause the picture to blur. If this happens, the video heads need to be cleaned. Purchase a non-abrasive head cleaning tape from your video dealer.

About Symbols

About the symbol display

” may appear on the TV screen during operation. This icon means the function explained in this owner’s manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbol is applicable only to the disc represented by the symbol.

DVD DVD

CD Audio CDs.

MP3 MP3 Discs.

INTRODUCTION

7

Image 7
Contents Page Regulatory Information FCC Part Safety PrecautionsPower Lines Power SourcesCleaning Power-Cord ProtectionSafety Check AccessoriesDamage Requiring Service Replacement partsTable of Contents Playable Discs Remote control battery installationRemote Control Operation Range Before UseAbout Symbols PrecautionsFront Panel Display Window Remote Control Component Video OUT Y Pb Pr DVD OUT Rear PanelConnections Connecting Antenna/Cable TV toOptional TV Connections Connections Basic TV ConnectionsJack Coaxial X to the corresponding input jack Accessory Audio/Video A/V Connections toConnections Optional Equipment Connections Digital Multi-channel soundSetting the On-Screen Display VCR Setup On-Screen Display OSDMenu Selection Preparation VCR Setup VCR Setup MenuPress SETUP/MENU to return to the TV screen Channel SelectionManual Clock Set VCR Setup Setting the ClockPress Menu when finished Auto Clock SetOn-Screen Display DVD Setup General InformationOn-screen display operation Language DVD Setup Initial SettingsInitial Settings General Operation PictureSound DVD SetupOthers Changing the 4-digit code Password DVDParental Control Rating DVDSpecial Effect Playbacks VCR Operation Normal PlaybackTimer Record menu will appear Timer RecordingPress 1 or 2 to choose the Program No VCR Operation Checking Erasing the Timer ProgramProgram Priority Dubbing and Editing One-Touch RecordingChecking the Recording Time To extend the Recording TimePlayback with Hi-Fi Stereo Audio Sound Multichannel TV Sound Indicator MTSVHS Hi-FI Stereo System MTS Broadcast MTS Multi-Channel TV SoundCounter Memory Function VCR Operation Tape Counter Memory FeatureAdditional Information Real-Time CounterDVD and Audio CD Operation Playing a DVD and Audio CD General FeaturesRepeat DVD CD DVD and Audio CD Operation General FeaturesSearch DVD CD Random CDTo Recall a Marked Scene Zoom DVDChanging the Audio Language DVD Changing the Audio Channel CDProgrammed Playback with Audio CD DVD and Audio CD Operation Special DVD FeaturesMP3 disc compatible with this DVD+VCR is limited as follows MP3 OperationPlaying an MP3 Discs About MP3Erasing the Complete Program List MP3 Operation Programmed Playback with MP3 DiscsRepeat Playback with MP3 Discs Erasing a Track from Program ListButtons used to operate the TV Controlling the TV with remote controlChart, find the code corresponding to Your brand of operational TVSymptom Cause Correction TroubleshootingMoisture Condensation Code Language Language Code ListGeneral Technical SpecificationsVCR Specification DVD SpecificationWho is Protected Warranty DVD+VCR Limited WarrantyWho Provides the Limited Warranty What is Covered and How Long