GoVideo DVD/VCR Combo manual Parental Control, Rating DVD, Password DVD, Changing the 4-digit code

DVD Setup (Continued)

Parental Control

Rating DVD

Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are country dependent. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes.

1 Select Rating on the Setup menu using the v and V buttons.

2While Rating is selected, press B.

3Go to step 4.

When you have already entered a password; Enter a 4-digit password using the numerical but- tons to confirm the personal 4-digit security pass- word, then press ENTER.

If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again.When you have not entered a password yet.

4tons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Unlock: If you select Unlock, Parental Control is not active. The disc will play in full.

Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the DVD+VCR, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit pass-

word or change the rating level in order to play the disc.Select a rating from 1 to 8 using the v/V but-

Press ENTER to confirm your rating selection,

5 then press SETUP/MENU to exit the menu.

Password DVD

If you change the rating level to 7 or lower, you must enter a 4-digit password to prevent playback of discs with higher ratings.

Aspect Ratio

Menu Language

TV Output Select

Digital Audio Output

2While Password is selected, press B.

3buttons to create a personal 4-digit security

password, then press ENTER.

Do not forget your password.Enter a 4-digit password using the numerical

Setting is complete.

Note

Confirmation of the 4-digit password is necessary when the code is changed (see Changing the 4-digit code below ).

Changing the 4-digit code

1Press SETUP/MENU to display the setup menu.

2Press V to select Password then press B.

3Enter the old code, then press ENTER.

4Select Change using the v/V buttons then press

ENTER.

5Enter the new 4-digit code, then press ENTER.

6Enter exactly the same code a second time and verify by pressing ENTER.

7Press SETUP/MENU to exit the menu.

If you forget your 4-digit code

If you forget your password, to clear the current pass- word, follow the procedure below.

1Press SETUP/MENU to display the setup menu.

2Press V to select Password.

3Use the Number buttons to enter the 6-digit number “210499,” and then press ENTER.

The 4-digit password is cleared.

4Enter a new code as shown above.

PREPARATION