DVD Setup (Continued)
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set the DVD+VCR’s Digital Audio Output according to the type of audio system you use.
DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if you connected the DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder) for 5.1 channel surround sound.
Stream/PCM: Select Stream/PCM if you connected the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder.
PCM: select when connected to a 2 channel digital stereo amplifier. The DVD+VCR outputs audio in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2 recording system.
Others
The DRC and Vocal settings can be changed. Press v/V to select the desired item and press ENTER. The setting of the selected item is changed between On and Off.
| Disc Audio | DRC Off |
| Disc Subtitle | Vocal On |
| Disc Menu |
|
Rating
Password
Aspect Ratio
Menu Language
TV Output Select
Digital Audio Output
Others
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound- track in the most accurate and realistic presentation possible. However, you may wish to compress the dynamic range of the audio output (the difference
Disc Audio
Disc Subtitle
Disc Menu
Rating |
Password |
Aspect Ratio |
Menu Language |
TV Output Select |
Digital Audio Output |
Others
DOLBYDIGITAL /PCM
Stream/PCM
PCM
between the loudest sounds and the quietest ones); for example, when listening late at night, or when you do not wish to disturb others. Set DRC to On for this effect.
Vocal
Set Vocal to On only when a
20