Initial Setup
‘Recording Options’ Settings
DVD Record Quality |
|
|
|
You can set the default DVD recording quality to: HQ (High Quality - 1 |
|
|
|
hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Extended Play - 4 hrs/disc) or | Recording Options |
|
|
|
|
| |
SEP (Very Low Quality - 8 hrs/disc). | •DVD Quality | HQ |
|
VCR Quality | SP |
| |
1 Press [SETUP]. The Setup menu appears. | Auto Chapter | EP |
|
Overwrite | SEP |
| |
|
|
| |
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup |
|
|
|
page. | œ √ † Choose | ENTER OK | SETUP Exit |
| … |
|
|
2Use [œ/√] to select ‘Recording Options ‘.
3While ‘Recording Options ‘ is selected, press [†] to select ‘DVD Quality‘.
4Press [√] to move to the second level.
5Use […/†] to select the desired Record Quality (HQ, SP, EP or SEP).
6Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
VCR Record Quality
You can set the default VCR recording quality to SP (Standard Play) or LP (Long Play). SP is higher quality, but LP provides 2 times the recording time; e.g., a 2 hour tape will record for 4 hours in LP mode.
Follow the same procedure as the ‘DVD Record Quality’.
Recording Options |
|
DVD Quality | SP |
•VCR Quality | |
Auto Chapter | LP |
Overwrite |
|
… | Choose | ENTER OK | SETUP Exit |
œ √ † |
Auto Chapter
During recording, chapter markers are added automatically at fixed intervals.
You can set this interval to 5 min, 10 min or 15 min.
But when you set DVD Record quality “SEP”, Auto Chapter interval could be set only ‘10 min’ or ‘15 min’.
To turn off automatic chapter marking, select ‘Off ‘. Follow the same procedure as ‘DVD Record Quality’.
Recording Options |
|
| |
DVD Quality |
|
| |
VCR Quality | Off |
| |
•Auto Chapter |
| ||
Overwrite | 05 min |
| |
|
| 10 min |
|
|
| 15 min |
|
… | Choose | ENTER OK | SETUP Exit |
œ √ † |
Overwrite
Immediately begins recording over the currently selected title.
Recording Options
DVD Quality
VCR Quality
Auto Chapter
Overwrite•On
Off
… | Choose | ENTER OK | SETUP Exit |
œ √ † |
20