Basicic Recordingi
Recording from TV
Follow the instructions below to record a TV program.
1Turn on the DVD Recorder+VCR and load a recordable disc or tape. Make sure your TV input is set to view the DVD Recorder+VCR.
2Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SEP (Super Long Play - 8 hrs/disc).
VCR: SP (Standard Play), LP (Long Play - 2 times SP)
3If your DVD Recorder+VCR does not show a TV program, press [INPUT] on the remote control. Use
4Press [AUDIO] to select the audio channel to record (Stereo, BIL, or Mono).
The table below shows what audio channel will be recorded with different settings and different types of broadcasts.
The last column (Monitor Audio) shows what you will hear during recording. For example, if the TV broadcast is in Stereo, then setting the DVD Recorder+VCR to Stereo will record the broadcast in Stereo, and the Monitor Audio will also be in Stereo.
TV Broadcast | Selected Audio | Broadcast Audio | Monitor | ||
L Ch | R Ch | Audio | |||
|
| ||||
MONO | MONO | MONO | MONO | MONO | |
STEREO | STEREO | L | R | STEREO | |
MONO | MONO | MONO | MONO | ||
| |||||
BIL | BIL I | BIL I | BIL I | BIL I | |
BIL II | BIL II | BIL II | BIL II | ||
|
5Press [REC (●)] once.
Recording will start. The REC indicator lights on the front panel display. Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see One Touch Record.
6Press [STOP (■)] to stop recording.
•The maximum number of DVD titles per disc is 49. If the DVD Recorder+VCR is powered off during DVD recording, the recording will not be saved.
•If a DVD+RW or unfinalized DVD+R disc is inserted in the tray, no title is played automatically after loading is finished.
•If you are recording to a blank DVD+R (+RW) disc, it may take up to 7 minutes (it depends on disc) for post processing after recording.
37
PLAYBACK RECORDING