Timer Recording
Canceling a Timer Recording
You can clear a Timer Recording any time before the recording actually starts.
•Use […†] to select the program you want to erase on the Timer Recorder List. Press [■STOP] to delete the program.
Stopping a Timer Recording in Progress
After a Timer Recording has started, you can still cancel the program by pressing [■STOP] button. To confirm, select ‘OK‘. To cancel, select ‘Cancel‘.
Timer Recording Troubleshooting
Even if a Timer Recording is set, the DVD Recorder+VCR will not record if:
•No disc is loaded.
•A
•Disc is protected in the ‘Disc Operation’ menu; see page 45.
•There are already 49 titles recorded on the disc.
You cannot enter a Timer Recording if:
•A recording is already under way.
•The start time has already passed.
•Eight Timer Recordings have already been set.
If two or more Timer Recordings overlap:
•You should set only one Timer Recording.
•You can choose replace old Timer Recording or not.
•Only one Timer recording will work.
Timer Recording
Recording time is overlapped with existing entry.Replace it?
OKCancel
Confirmation is not possible when:
•Disc is protected in the ‘Disc Operation’ menu; see page 45.
•There are already 49 titles recorded on the disc.
RECORDING
If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.
If there is VPS/PDC fuction is ON, even though timer recording is completed, timer indicator might not be erased. You have to wait until the actual VPS/PDC time signal is over.
43