Daewoo DF-4500P/4700P user manual Preferences / VCR, Preferences / Modulator Output

DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 26 mac001 1200DPI 90LPI

Initial Setup

VPS/PDC

VPS/PDC is a service provided by some stations to enable you to perform timer recordings precisely even if the broadcaster delays the start time of the programme slightly. The time you enter is the VPS/PDC time so this must match exactly the start time of the programme as advertised. NB: Do not allow 5 mins before the correct start time otherwise the machine will not record. Not all stations offer VPS/PDC, in which case the player will start at the time you enter and not the actual start time of the programme.

Preferences
Video
Audio
Parental Ctrl		Auto Clock Set
Auto Settings			On
VCR		• VPS/PDC
Modulator Out			Off
…	Choose	ENTER OK	SETUP Exit
œ √ †

If you wish to start recording at a specific time without it being adjusted by

the VPS/PDC system in the event of a delay, switch VPS/PDC off otherwise the player will not record. Follow the same procedure as ‘Auto Clock Set’ to set the ‘VPS/PDC’ status.

• "VPS/PDC" and "Auto Clock Set" are not provided for some countries.

Preferences / VCR

This feature enables you to search for Index marks or specific times on your VHS tapes.

1Press [SETUP]. The Setup menu appears.

While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page.

2Use [œ/√] to select ‘Preferences ‘.

3While ‘Preferences ‘ is selected, press [†] to select ‘VCR‘.

4Press [√]. The ‘VCR‘ submenu is displayed.

5Select ‘Index+’, ‘Index–’ or ‘Go to Zero’.

If you select ‘Index+’ (or ‘Index–’) and press [ENTER], your DVD Recorder+VCR will locate your index mark and begin playback.

If you select ‘Go-To Search’ and press [ENTER], your DVD Recorder+VCR will wind to the position 0:00:00 and stop.

• The VCR menu is activated only when a video cassette tape is inserted.

Preferences

Video

Audio

Parental Ctrl

Auto Settings

•VCRIndex+

Modulator Out Index-

Go to Zero

…	Choose	ENTER	OK	SETUP	Exit
œ √ †
Preferences
Video
Audio
Parental Ctrl
Auto Settings
VCR		• Index+
Modulator Out		Index-
		Go to Zero
…	Choose	ENTER	OK	SETUP	Exit
œ √ †

Preferences / Modulator Output

You can change the modulator output channel using the [0-9] buttons.

26

Preferences

Video

Audio

Parental Ctrl

Auto Settings

VCR

•Modulator Out

…	Choose	ENTER OK		SETUP		Exit
œ √ †
		Modulator Out
			Channel	œ	52		√
			OK	Cancel