30EXTERNAL CONTROL DEVICE SETUP
ENGLISH
01. Power (Command: k a)
►► To control Power On/Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off | 01 : Power On |
Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To show Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
*Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function.
*OK Ack., Error Ack. and other message may display on the screen when TV is power On.
02.Aspect Ratio (Command: k c) (Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu.
| Transmission [k][c][ ][Set ID][ | ][Data][Cr] |
|
| ||
|
|
|
|
|
|
|
Data 01 | : Normal screen | 07 | : 14:9 |
|
| |
|
| (4:3) | 09 | : Just Scan | ||
02 | : Wide screen | 0B | : Full Wide | |||
|
| (16:9) | 10 to 1F : Cinema Zoom 1 to 16 | |||
04 | : Zoom |
|
|
|
| |
06 | : Original |
|
|
|
| |
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
*Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
*In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz), Component( 720p, 1080i, 1080p 50 Hz / 60 Hz) mode, Just Scan is available.
*Full Wide is supported only for DTV.
03.Screen Mute (Command: k d)
►► To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 : | Screen mute off (Picture on) |
| Video mute off |
01 : Screen mute on (Picture off) | |
10 : | Video mute on |
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
*In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.
04. Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01: Volume mute off (Volume on) Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05.Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
*Refer to ‘Real data mapping’. See p.33. Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06.Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
*Refer to ‘Real data mapping’. See p.33. Ack [g][ ][Set ID][ ][OK/NG][Data][x]
07.Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.33.
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
►► To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
*Refer to ‘Real data mapping’. See p.33. Ack [i][ ][Set ID][ ][OK/NG][Data][x]