Operate other equipment with Beo4 or Beo5
The
Use the Beo4 remote control
between connected video equipment, such as a
Use the Bang & Olufsen remote control to gain access to the functions offered by your non- Bang & Olufsen equipment.
When you switch on the equipment, the functions are available via a
For instruction in the various functions offered by your equipment, see the product’s own guide.
Not all connected video equipment are supported by Bang & Olufsen. For further information about supported equipment, contact your Bang & Olufsen retailer.
If you have a Beo4 remote control, some functions are available directly via Beo4 when you switch on the equipment.
Additional functions are available through a
Your Bang & Oufsen retailer can provide you with a show mapping’ survey which explains operation of the connected equipment with Beo4 in more detail.
>Press a source button, for example V MEM, to switch on connected equipment.
>Press MENU to bring up the
>Press the number button that activates the function you want, or press one of the coloured buttons to activate a function.
The
GUIDE1
MENU2
TEXT3
INFO4
WIDE5
Example of a
Direct Beo4 operation
If you know which Beo4 button activates the function you want, you can activate the function without bringing up the
While your equipment is on …
>Press one of the coloured buttons to activate a function.
>Press and hold the centre button to bring up the Program Guide or the ‘Now/Next’ banner on the screen if you are using equipment that supports these functions.
>Use and to step between channels*.
>Use and to rewind and wind in, for example, recordings*.
>Press MENU and use the number buttons to activate the function you want.
*This operation does not apply to Beo4 without navigation button.
34