Bang & Olufsen Bang Olufsen Sion: Optimize Your Flat Panel Television Experience

Page 40

>> Distribute sound and picture with BeoLink

System modulator

Link frequency

If you have an audio setup, such as a BeoLink Active/Passive, and you choose to set up a non-linkable television in the same room, you must set the system­ modulator to ON. The factory setting is AUTO, which must be used if you are using a linkable Bang & Olufsen television.

To switch on the system modulator …

>Bring up the TV SETUP menu and highlight

OPTIONS.

>Press the centre button to bring up the OPTIONS menu and highlight

CONNECTIONS.

>Press the centre button to bring up the CONNECTIONS menu, and highlight LINK TUNING.

>Press the centre button to bring up the LINK TUNING menu and highlight

MODULATOR.

>Use the navigation button left or right to reveal ON.

>Press the centre button to store the setting, or …

>… press and hold BACK to leave all menus without storing.

If, for example, a TV channel in your area is broadcasted on the same frequency as the factory setting for the BeoLink system; 599 MHz, you must tune the system modulator to an unoccupied frequency. When you change the link frequency in the main room television, make sure that the link frequency in the link room television corresponds to it.

To change the link frequency …

>Bring up the TV SETUP menu and highlight

OPTIONS.

>Press the centre button to bring up the OPTIONS menu and highlight

CONNECTIONS.

>Press the centre button to bring up the CONNECTIONS menu, and highlight LINK TUNING.

>Press the centre button to bring up the LINK TUNING menu and highlight

FREQUENCY.

>Use the navigation button left or right to find an unused frequency.

>Press the centre button to store the setting, or …

>… press and hold BACK to leave all menus without storing.

LINK TUNING

 

FREQUENCY

599

TV SYSTEM

B/G

MODULATOR

AUTO

 

 

The LINK TUNING menu.

 

 

 

LINK TUNING

 

FREQUENCY

599

FINE TUNE

0

TV SYSTEM

B/G

 

 

The LINK FREQUENCY menu.

When tuning in the link frequency in the link room, a test image is shown. FINE TUNE is only available in link room/Option 4 setups.

40

Image 40
Contents BeoVision 8-40 Contents Feature Activation Menu Language Menu overviewNavigate in menus Beo4 with navigation buttonBeo4 without navigation button Beo5First-time setup Sequence of menus in first-time setupChoose menu language Tuner Setup TV Tuner DVB HD Tuner setupTo disable the internal tuner … Connections CableDVB module IR typeConnections Bring up the computer image on the screen Connect and use a PCTo bring up the computer picture … Available sockets may vary according to your setup What is connected?Register additional video equipment AV2 Source None Name IR Socket IR Type Hdmi DIF NoneRegister additional video equipment What’s on the AV1 - AV6 menu …Standby settings … Options areCamera and headphones sockets If the signal from the camera is switched off …Sockets for temporary connections Watch digital pictures on your televisionTuning Edit tuned TV channelsMove, name or delete tuned TV channels Enter the Edit Channels menu …Eurosport ZDF Discover Edit ChannelsEdit Channels BBC Eurosport ZDF Discover Manual Tuning Frequency Adjust tuned channelsEdit tuned TV channels Auto Tuning Re-tune via automatic tuning …Re-tune or add channels Edit Channels PrimeLoudspeaker setup surround sound Select your speaker typesSpeaker Type Front Beolab Rear Subwoofer YES To register the speaker types …Set speaker distance Loudspeaker setup surround soundTo set the speaker distances … To calibrate the sound level … Calibrate the sound levelManual See the name of the active sound system To see the active sound system …Sound System An example of a sound system that can appear in the menuAdjust picture and sound settings Adjust brightness, colour or contrastGame Mode PictureGame mode Adjust picture and sound settingsTo activate Game Mode with Beo4 directly … To activate Game Mode with Beo5 directly …Adjust volume, bass or treble To adjust sound …Daily use of speaker combinations Adjust speaker balance with Beo4Select speakers for movie sound Set the television to switch itself on or off Sleep TimerDTV Play Timer Mode Group Sport DTV Play TimerAuto Standby After 1 Hour After 2 Hours After 4 Hours OFF Set up your Beo4 remote control BEO4 Setting Navigation Button No Navigation ButtonTo make Beo4 settings … SettingFeature activation Feature activation keyFeature Activation To enter an activation key …Settings in the Hdmi Matrix menu … Important informationHdmi Matrix YES Inputs IR Socket PUC1 IR Type Plug Connections menu …Add sources to your setup … Configuration of inputs …Hdmi Matrix Input None OtherTeletext Store favourite teletext pagesUse the Beo4 remote control Operate other equipment with Beo4 or Beo5Direct Beo4 operation While your equipment is on …Use equipment menus Operate other equipment with Beo4 or Beo5While equipment menus are shown … Example of a Beo5 display used to operate a set-top boxProgram the AV setup with Beo4 Option setting for the television …Option setting for the audio system … Connect and operate an audio systemProgram the AV setup with Beo5 Connect and operate an audio systemUse an audio/video system Distribute sound and picture with BeoLink Link connectionsLink Tuning Frequency System modulatorTV System Modulator Auto Fine Tune TV SystemOption setting Your television in a link roomWith Beo4 … With Beo5 …Link room operation Two televisions in the same room One remote control for both televisionsBeo4 Operate your television in Option 4 …