Two televisions in the same room
If you have placed your television in a room where you already
One remote control for both televisions
have a Bang & Olufsen television, and commands from your remote control can be received by both televisions, you must change the Option setting of the television. This prevents simultaneous activation of both televisions.
When you Option program the television, disconnect the television you do not want to program from the mains. This ensures that only the television, you want to program, receives the Option programming.
For your television to function properly, it is essential that the television is set to the correct Option, see page 41 for information on Option programming. If you have a Beo4, you must set your television to Option 4, and if you have a Beo5, you must set the television to the correct zone*.
Beo4 – Operate your television in Option 4 …
Normally, you can activate a source, such as TV, simply by pressing the relevant source button on your remote control. However, when you set your television to Option 4, you must do the following, if you have a Beo4:
>Press LIST* and use the navigation button up or down to bring up LINK in the Beo4 display.
>Press a source button, such as TV.
*In order to display LINK on Beo4, you must first add it to the Beo4 list of functions. See the Guide enclosed with your Beo4.
BeoVision 8
Option 4
LIST
LINK
TV
TV
Beo4 operation.
BeoVision 8
Zone ‘A’
Zone ‘A’
TV
BeoVision 8
Zone ‘B’
Zone ‘B’
TV
Beo5 operation.
*NOTE! For information about choice of zone, contact your Bang & Olufsen retailer.
43