>> Connections
IR type
In the AV menus you can select how a PUC controlled product is connected. You can choose between ‘PLUG’ (cable) and ‘IR’ (IR Blaster).
STB
STB
PLUG |
IR |
remote control, attach a Bang & Olufsen IR- transmitter to each of the products. Connect each transmitter to the corresponding socket marked PUC on the main connection panel.
DVB module
The CA module is a ‘card reader’ for your Smart Card which decodes the coded signals sent out by the programme provider.
BACKSIDE | CHIPSIDE |
05.5V ACA SMARTCARD
Insert the Smart Card in the CA module with the chip facing towards the television. The CA module has one protruding edge on one side and two protuding edges on the other side. The side with one edge should face upwards. The Conax Smart Card must be inserted with the chip facing away from the television front.
9