Daily use of speaker combinations
You can extend your television into a surround sound system by adding Bang & Olufsen loudspeakers and a BeoLab subwoofer.
When you switch on one of the sources, the television automatically selects the appropriate speakers, depending on what kind of sound suits the source you are using. The speaker combination is optimised if you select SPEAKER in the Beo4 display and press the centre button on Beo4.
NOTE! If you have added only two front speakers to the TV, you will only be able to choose SPEAKER 1 – 3.
Select speakers for movie sound
You can select the speaker combination that suits the source you are using, provided that the various speaker modes are available in your television.
>Press LIST and use the navigation button up or down to bring up SPEAKER in the Beo4 display (Beo5: Press to bring up the Scene display on Beo5, then press Speaker to bring up the Speaker display).
>Press the centre button, if you want to optimise the sound, or press 1 – 5 to select the speaker combination you want. (Beo5: Press Optimise or Mode
>Press and hold BACK to remove SPEAKER from the Beo4 display and return to the source you were using. (Beo5: Press to remove the Speaker display).
SPEAKER 1
SPEAKER 2
Adjust speaker balance with Beo4
You can temporarily adjust the balance between the speakers.
>Press LIST and use the navigation button up or down to bring up BALANCE in the Beo4 display and press the centre button.
>Now use , , and to adjust the speaker balance front, back, left and right.
>Press and hold BACK to remove SPEAKER from the Beo4 display and return to the source you were using.
SPEAKER 3
SPEAKER 4
SPEAKER 5
26