Your television in a link room
If you have BeoLink installed in your home and you choose to
Option setting
place your television in a link room, you can operate all connected systems through the television.
You must follow the procedure described below when you connect your television for use in a link room:
1Connect the link room television to the mains
2Using your remote control, programme the link room television to the correct Option
3Disconnect the link room television from the mains
4Make the necessary connections
5Reconnect the link room television to the mains.
For your entire system to function properly, it is essential that the television in the link room is set to the correct Option before you connect it to the television in the main room!
With Beo4 …
>While holding the • button (standby), press LIST on Beo4.
>Let go of both buttons.
>Press LIST and use the navigation button up or down to bring up OPTION? in the Beo4 display and press the centre button.
>Press LIST and use the navigation button up or down to bring up V.OPT in the Beo4 display and press 6*.
With Beo5 …
>Place yourself in front of the link room television.
>While holding the • button (standby), press the centre button to bring up the Setup menu on Beo5.
>Let go of both buttons.
>Press Option Pgm to bring up the Option Programming display on Beo5.
>Press the button that matches the zone in which the television is placed.
Main room | Link room |
Option 6*
*If you connect the television for use in a link room where other link systems are already connected, such as speakers, you must set the television to Option 5 instead.
41