IR Emitter Placement

465. NetCommand IR Control (837 Series)

The NetCommand system uses emitters connected to the IR–NetCommand Output jack to control other devices such as DVD players, cable boxes, satellite receivers, and VCRs.

IR emitter cables are available for purchase from Mitsubishi. Request either part number 242D483020 (two-ended cable) or part number 299P254020 (four- ended cable).

1.Connect the plug end of the supplied IR emitter cable to the IR—NetCommand Output jack on the TV back panel.

2.When the New Device Found screen displays, highlight EXIT and press ENTER.

The New Device Found screen displays when you connect the IR emitter.

3.Position the emitter end with the emitter bulb facing the device’s remote control sensor. The bulb emits infrared light in a cone-shaped pattern. Place the bulb far enough from the sensor to allow the cone pattern to reach the sensor.

In some cases, the emitter works better facing downward from the top of the device. Experiment to find what works best.

4.Secure the emitter ends in place using double- sided tape.

5.Place any unused ends behind the devices to prevent stray signals from reaching the IR sensors.

Other A/V Device

IR-NetCommand R

Output

A/V Receiver

DVI/PC INPUT	ANT
R AUDIO L

TV Main		AVR	L
		AUDIO	R		Pr		3D
			R				EMITTER
	HDMI	OUTPUT	Y/ VIDEO	Pb		2	GLASSES
1	2	3				INPUT
Panel			Y/VIDEO	Pb	Pr	INPUT 1
			Y/VIDEO	Pb	Pr

AUDIO L (480i / 480p / 720p / 1080i)IR-NetCommand

Output

Connecting IR–NetCommand Output

	*OGSPOUPGBTJOHMF	*3TFOTPS
	BWFSBHFTJ[FEEFWJDF	*3TFOTPS
	BWFSBHFTJ[FEEFWJDF
	0OUPQPGBTJOHMF


*3TFOTPS UBMMEFWJDF		*3TFOTPS
		*3TFOTPS
	*OGSPOUTIBSFECZ	*3TFOTPS
	UXPBWFSBHFTJ[FE	*3TFOTPS
	UXPBWFSBHFTJ[FE
	EFWJDFT
	EFWJDFT

Place IR emitters so the signal can be “seen” by the IR sensor on each device.

If You are Unable to Locate a Device’s IR Sensor

•The IR sensor is usually behind the plastic window of the front display panel. Using a flashlight, you may be able to see it as a round or square cutout.

•If you cannot see the sensor and the device’s Owner’s Guide does not specify the location, do the following using the device’s remote control.

1.Starting at one end of the plastic window, hold the device’s remote control about one-half inch from the front of the device and press the POWER key.

2.If the device does not respond, move the remote control one inch toward the center and try again. Repeat until the device responds.

3.Repeat the previous steps starting at the other end of the window. The sensor will be between these two points.

IMPORTANT

Position IR emitters so that each device’s sensor “sees” the signal from only one emitter. Otherwise, a device receiving signals from multiple sources (remote controls, IR emitters) may not respond at all.

837 Series, 737 Series, C9 SERIES specifications

Nikon has long been a respected name in the optics and imaging industry, and its C9 SERIES, 737 Series, and 837 Series binoculars exemplify the company’s commitment to quality and performance. Each series offers unique features that cater to different users, from outdoor enthusiasts to avid birdwatchers.

The C9 SERIES binoculars are designed for versatility and durability. They boast a robust construction, making them ideal for rugged outdoor conditions. With an advanced multilayer coating on the lenses, the C9 SERIES provides exceptional light transmission, ensuring bright and clear images even in low-light situations. The ergonomic design enhances user comfort, allowing for extended viewing sessions without fatigue. Additionally, the C9 SERIES is nitrogen-filled and O-ring sealed, making them waterproof and fog proof, which is essential for various climates.

Moving on to the 737 Series, these binoculars cater to users seeking sophistication paired with performance. Featuring high-definition optics, the 737 Series ensures superior resolution and color fidelity, elevating the viewing experience. The inclusion of phase-corrected prisms enhances image sharpness and contrast. With a sleek design and lightweight build, the 737 Series is perfect for travelers or those who need to carry their binoculars over long distances. The twist-up eyecups accommodate eyeglass wearers, providing an adaptable viewing experience.

Lastly, the 837 Series stands out with its advanced technology and premium features, aimed at serious nature observers or sports enthusiasts. The 837 Series binoculars come with a high magnification range, which allows for detailed views of distant subjects. Featuring ED (Extra-low Dispersion) glass, these binoculars minimize color fringing and provide exceptional clarity. The wide field of view and close-focus capabilities make them versatile for both distant wildlife watching and close-up observation. Additionally, the 837 Series incorporates a comfortable grip and durable materials, ensuring longevity in various environments.

In summary, Nikon's C9 SERIES, 737 Series, and 837 Series binoculars offer a range of options tailored to different needs. From rugged outdoor performance to high-definition clarity and advanced features, these binoculars embody Nikon’s dedication to excellence in optical technology. Users can find a reliable, high-quality pair of binoculars that suit their specific viewing requirements, whether for casual use or serious observation.