Nikon 737 Series, 837 Series, C9 SERIES manual General TV Operation Symptom Remarks

Page 74

74Appendices

Appendix E: Troubleshooting, continued

General TV Operation

 

Symptom

Remarks

1.

A fan is running even while the TV is powered

The room is too warm. When the TV is off, internal components

 

off.

continue to draw power and must be cooled by the fan.

 

 

 

2.

The fan gets louder after the TV is shut off.

Normal operation. The fan speeds up to cool the lamp quickly

 

 

after the TV has been shut off.

 

 

 

3.

The TV remote control does not work.

• Check that the batteries are fresh and installed correctly.

 

 

• Check that the control mode on the remote is set to TV.

 

 

Be no more than 20 feet from the TV when using the remote control.

 

 

• Program the remote control to operate the TV or other device.

 

 

• Reset the remote control.

 

 

 

4.

When I try to use the remote control, the

Replace the batteries.

 

POWER key blinks five times.

 

 

 

 

 

 

5.

TV does not respond to the remote control or

Unplug the AC power cord for 10 seconds.

 

to control-panel buttons and TV will not power

Press and hold the POWER button on the control panel to

 

on or off.

 

perform system reset.

 

 

 

6.

When a device is selected from the Activity

• Make sure the selected device is turned on.

 

menu, the screen is blue or black (no signal

• Begin play of the device.

 

source).

 

 

7.

You have forgotten your Lock menu pass code.

See “Bypassing the Parental Lock”, Appendix A.

 

 

 

8.

Rating restrictions are not working.

Open the Lock > Parental Lock menu and:

 

 

• Verify that the ratings locks are active.

 

 

• Check the Lock Time/Unlock Time to check if rating restric-

 

 

 

tions are disabled.

 

 

• Rating restrictions apply only to content on the ANT input.

 

 

 

9.

On-screen displays appear each time you

Normal TV operation.

 

change a function.

 

 

 

 

 

 

10.

A warning message appeared on screen

Internal TV temperature has exceeded proper levels. Cool

 

stating, “TV will shut down in a few seconds.

 

the room.

 

Please check if the air flow is blocked.”

The TV has overheated. Clear blocked air vents and ensure

 

 

 

at least four inches of clearance on all sides of the TV.

 

 

• Clean the air filter on the lamp cartridge.

 

 

 

 

11.

I have turned on CEC for my HDMI devices but

First turn off the TV’s HDMI control for the specific device. Open

 

control is erratic and I wish to disable it.

 

the Inputs > HDMI Control menu, select the device, select Off.

 

 

• Disable CEC on the device itself. See the device’s instructions.

 

 

• If the problem persists, do the following:

 

 

 

1. Disconnect the device from the TV.

 

 

 

2. Reconnect the device to the TV and Auto Input Sensing will

 

 

 

recognize the device with CEC disabled.

 

 

 

 

Image 74
Contents C9 Series MB-S73A Stand RequirementTV Model Stand Model Contents Internal Fans Installation and Operating NotesLamp Replacement TV SoftwareReplacement Parts Outdoor Antenna GroundingSpecial Features of Your TV First-Time Power-On Package ContentsRemote Control Batteries Before You BeginRemote Control TV ControlsStatus Light System ResetTV Control Panel Panel-Lock ReleaseSetting Up Other Inputs Setting Up TV InputsUsing the ANT Antenna Input Memorizing Channels with Channel Scan For the ANT inputDigital Audio Output About Auto Input Sensing Auto Output SensingHdmi AVR Audio OutputWatching Broadcast TV Basic TV OperationSelecting an Input to Watch Watching DVDs or VideosOther TV Features Making Picture AdjustmentsAudio Settings Other InformationPicture Quality Auto Input SensingConnection Types Surround SoundConvenience Inputs Inputs and OutputsMain Connection Panel Hdmi Inputs High-Definition Multimedia Interface IR-NetCommand OutputANT Antenna Pb Pr Component VideoBlu-ray Player Pb Pr Component Video Device Hdmi DeviceHdtv Cable Box, Satellite Receiver, DVD SatelliteComposite Video Device Antenna or Cable TV ServiceDVI Video Device Cable Box, Satellite Receiver, DVD PlayerRF Splitter VCR or DVD Recorder to an Antenna or Wall Outlet CableVCR or DVD Recorder to a Cable Box Audio Box Video fromReceiver Receiver with Hdmi OutputSleep Sleep TimerSelecting an Input Redirecting Audio Output Controlling A/V Receiver Sound VolumeChannelView Channel Listings Standard-Definition Analog Channels Status DisplayAbout Channel Numbers Standard-Definition Digital ChannelsDVD Image Definitions TV Signals and Display FormatsSignal Definitions TV Display Format DefinitionsWatching 3D Video Initial Setup3D Video To Watch Regular non-3D VideoConnecting a Computer to the TV Computer Video Connection Audio Video OutputImage Resolution Using the TV with a Personal ComputerComputer Video Adjustments Computer Display FormatsPlaying a Slide Show or Playlist Camera Images and Music FilesUSB Media Player Menu Series TVs OnlySlideshow + Music Music only Thumbnail and Playlist Menus USB Media Setup MenuUSB Port Compatible Picture Files Press ACTIVITY, select Watch Movie Cam, and press Enter Photos and Moving Video As Composite VideoOptional Audio Cable Source device connected directly to the TV Introduction to Home-Theater ControlMain Menu Menu NavigationAdjust 3D Mode On, Off Using PerfectColorUsing PerfecTint 837 Series Picture+ PerfectColor PerfectColor SlidersFrom the Adjust Picture menu From the Adjust Audio menu SAPCaptions on Digital Channels CaptionsCaptions on Analog Channels Initial DSTAnt Cable Adding/Deleting Channels Using the Channel Edit MenuChannel Ant Air ScanInputs AVRDVD DVD2 DVR How is the Activity Menu Generated?Photos Music USB VCRLock Parental Unlock Time Time Lock by TimeLock Time Other Menu Options alternate rating systemAbout NetCommand IR Control Important Note on NetCommandIR Emitter Placement If You are Unable to Locate a Device’s IR SensorIf the device has no Power OFF key, skip this step Initial NetCommand SetupAdding or Removing Device Keys from NetCommand Control Controlling Most Device Types Operating NetCommand-Controlled DevicesSpecial Operation Description and Setup How to Use Special Operation MethodsMore Key Menu and NetCommand SP/EPNetCommand Specialized Device Keys Controlling A/V Receiver Power Controlling an A/V Receiver After NetCommand SetupSwitching Audio to and from the A/V Receiver Controlling Other A/V Receiver FunctionsSetup to Control A/V Receiver Power and Volume Setting Up A/V Receiver ControlPower and Volume Before You BeginAutomatic Audio or Audio/Video Switching Before You Begin Case 3 Automatic Audio Video Switching via HdmiMore About Using an Hdmi Connection Open the Inputs Learn menu High-definitionDVD player Appendices Mitsubishi DLP Projection TV Bypassing the Parental LockThis page intentionally left blank More Menus Appendix B Programming the Remote ControlFunctions Available for Other A/V Devices TV modesCode Verification Programming the Remote ControlAudio Lock Universal A/V Receiver Control Cable Boxes Programming CodesAudio Amplifiers Satellite Receivers VCRsKEC GFMHI-Q KTVDVD and Blu-ray Players JMB GPXIRT JSIDevice does not have CEC compatibility Action Appendix C Hdmi Control of CEC DevicesEnabling Hdmi Control of CEC Devices Hdmi Control of an Hdmi A/V Receiver and Connected Devices OptionalUsing Hdmi Control Resolving CEC ConflictsLamp Part Number 915B403001 Lamp-Cartridge Replacement and CleaningAppendix D TV Care Lamp-Cartridge Filter Cleaning Lamp-Cartridge ReplacementInstalling the New Lamp Cartridge Removing the Old Lamp CartridgeCleaning Recommendations Care of the Remote ControlService and Customer Support Appendix E TroubleshootingTV Reset Comparison Guide ServiceRead the ON-SCREEN Initial Channel Edit menuNew Device Found screen TionsGeneral TV Operation Symptom Remarks TV Channels Symptom Remarks TV Power On/Off Symptom RemarksPicture Symptom Remarks Sound Symptom RemarksReceiver Set Up for Audio and Video Switching over Receiver with Hdmi ControlAppendix E Troubleshooting Trademark and License Information Mitsubishi TV Software Mitsubishi DLP Projection Television Limited Warranty To Obtain Warranty ServiceThis Limited Warranty does not Cover Mitsubishi Digital Electronics AMERICA, INCIndex HdmiIndex Page MDEAservice@mdea.com System Reset

837 Series, 737 Series, C9 SERIES specifications

Nikon has long been a respected name in the optics and imaging industry, and its C9 SERIES, 737 Series, and 837 Series binoculars exemplify the company’s commitment to quality and performance. Each series offers unique features that cater to different users, from outdoor enthusiasts to avid birdwatchers.

The C9 SERIES binoculars are designed for versatility and durability. They boast a robust construction, making them ideal for rugged outdoor conditions. With an advanced multilayer coating on the lenses, the C9 SERIES provides exceptional light transmission, ensuring bright and clear images even in low-light situations. The ergonomic design enhances user comfort, allowing for extended viewing sessions without fatigue. Additionally, the C9 SERIES is nitrogen-filled and O-ring sealed, making them waterproof and fog proof, which is essential for various climates.

Moving on to the 737 Series, these binoculars cater to users seeking sophistication paired with performance. Featuring high-definition optics, the 737 Series ensures superior resolution and color fidelity, elevating the viewing experience. The inclusion of phase-corrected prisms enhances image sharpness and contrast. With a sleek design and lightweight build, the 737 Series is perfect for travelers or those who need to carry their binoculars over long distances. The twist-up eyecups accommodate eyeglass wearers, providing an adaptable viewing experience.

Lastly, the 837 Series stands out with its advanced technology and premium features, aimed at serious nature observers or sports enthusiasts. The 837 Series binoculars come with a high magnification range, which allows for detailed views of distant subjects. Featuring ED (Extra-low Dispersion) glass, these binoculars minimize color fringing and provide exceptional clarity. The wide field of view and close-focus capabilities make them versatile for both distant wildlife watching and close-up observation. Additionally, the 837 Series incorporates a comfortable grip and durable materials, ensuring longevity in various environments.

In summary, Nikon's C9 SERIES, 737 Series, and 837 Series binoculars offer a range of options tailored to different needs. From rugged outdoor performance to high-definition clarity and advanced features, these binoculars embody Nikon’s dedication to excellence in optical technology. Users can find a reliable, high-quality pair of binoculars that suit their specific viewing requirements, whether for casual use or serious observation.