Nikon 737 Series, 837 Series, C9 SERIES manual Cleaning Recommendations, Care of the Remote Control

Page 71

Appendices71

Appendix D: TV Care, continued

Cleaning Recommendations

Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines:

First, turn off the TV and unplug the power cord from the power outlet.

Occasionally clean dust build-up from the air-intake grilles on the back and sides of the TV. Clean using a vacuum cleaner with a brush attachment.

Top and Sides of the TV

Gently wipe down your TV with a soft, non-abrasive cloth such as cotton flannel, microfiber, or a clean cloth diaper, lightly moistened with water. Dry with a second dry, soft, non-abrasive cloth.

For oily dirt, add a few drops of mild liquid deter- gent, such as dishwashing detergent, to the water used to moisten the cloth. Rinse with a second cloth moistened only with water. Dry with a third dry, soft, non-abrasive cloth.

Screen

Follow the instructions for the top and sides, wiping gently in an up and down motion.

Clean the entire screen evenly, not just sections of the screen.

Do not allow liquid to drip down the screen, as some liquid may enter the TV through the gap between the screen and screen frame.

You may purchase Mitsubishi Screen Cleaner, part number CLEANER-VSS, by calling (800) 553-7278.

General Cleaning Precautions

DO NOT allow liquid to enter the TV through the ventilation slots or any crevice.

DO NOT use any strong or abrasive cleaners, as these can scratch the surfaces.

DO NOT use any cleaners containing ammonia, bleach, alcohol, benzene, or thinners, as these can dull the surfaces.

DO NOT spray liquids or cleaners directly on the TV’s surfaces.

DO NOT scrub or rub the TV harshly. Wipe it gently.

Care of the Remote Control

Remote Control Tips

For longer life, use alkaline batteries.

Do not mix old and new batteries.

Be within 20 feet of the equipment.

Do not press two or more keys at the same time unless instructed to do so.

Do not allow the unit to get wet or become heated.

Keep the unit out of direct sunlight.

Avoid dropping on hard surfaces.

Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth.

Resetting the Remote Control

If TV mode is selected and the TV does not respond properly, reset the remote control.

1.Press and hold POWER for several seconds until the mode indicator blinks twice and goes off.

2.Release the POWER key.

3.Press keys 0 0 9 3 5 and the mode indicator will blink twice when you finish entering the code. When entering the code, pause for a moment between each key press to ensure it is recognized.

Low-Battery Indicator

If you press a key and the mode indicator blinks five times, replace the remote control’s batteries.

Image 71
Contents C9 Series MB-S73A Stand RequirementTV Model Stand Model Contents TV Software Installation and Operating NotesLamp Replacement Internal FansOutdoor Antenna Grounding Replacement PartsSpecial Features of Your TV Before You Begin Package ContentsRemote Control Batteries First-Time Power-OnTV Controls Remote ControlPanel-Lock Release System ResetTV Control Panel Status LightMemorizing Channels with Channel Scan For the ANT input Setting Up TV InputsUsing the ANT Antenna Input Setting Up Other InputsAVR Audio Output About Auto Input Sensing Auto Output SensingHdmi Digital Audio OutputWatching DVDs or Videos Basic TV OperationSelecting an Input to Watch Watching Broadcast TVOther Information Making Picture AdjustmentsAudio Settings Other TV FeaturesSurround Sound Auto Input SensingConnection Types Picture QualityConvenience Inputs Inputs and OutputsMain Connection Panel Pb Pr Component Video IR-NetCommand OutputANT Antenna Hdmi Inputs High-Definition Multimedia InterfaceSatellite Pb Pr Component Video Device Hdmi DeviceHdtv Cable Box, Satellite Receiver, DVD Blu-ray PlayerCable Box, Satellite Receiver, DVD Player Antenna or Cable TV ServiceDVI Video Device Composite Video DeviceAudio Box Video from VCR or DVD Recorder to an Antenna or Wall Outlet CableVCR or DVD Recorder to a Cable Box RF SplitterReceiver with Hdmi Output ReceiverSleep Sleep TimerSelecting an Input Redirecting Audio Output Controlling A/V Receiver Sound VolumeChannelView Channel Listings Standard-Definition Digital Channels Status DisplayAbout Channel Numbers Standard-Definition Analog ChannelsTV Display Format Definitions TV Signals and Display FormatsSignal Definitions DVD Image DefinitionsTo Watch Regular non-3D Video Initial Setup3D Video Watching 3D VideoComputer Video Connection Audio Video Output Connecting a Computer to the TVComputer Display Formats Using the TV with a Personal ComputerComputer Video Adjustments Image ResolutionSeries TVs Only Camera Images and Music FilesUSB Media Player Menu Playing a Slide Show or PlaylistSlideshow + Music Music only Thumbnail and Playlist Menus USB Media Setup MenuUSB Port Compatible Picture Files Press ACTIVITY, select Watch Movie Cam, and press Enter Photos and Moving Video As Composite VideoOptional Audio Cable Introduction to Home-Theater Control Source device connected directly to the TVMenu Navigation Main MenuAdjust Picture+ PerfectColor PerfectColor Sliders Using PerfectColorUsing PerfecTint 837 Series 3D Mode On, OffFrom the Adjust Picture menu SAP From the Adjust Audio menuCaptions on Digital Channels CaptionsCaptions on Analog Channels DST InitialScan Adding/Deleting Channels Using the Channel Edit MenuChannel Ant Air Ant CableAVR InputsUSB VCR How is the Activity Menu Generated?Photos Music DVD DVD2 DVRLock Parental Other Menu Options alternate rating system Time Lock by TimeLock Time Unlock TimeImportant Note on NetCommand About NetCommand IR ControlIf You are Unable to Locate a Device’s IR Sensor IR Emitter PlacementIf the device has no Power OFF key, skip this step Initial NetCommand SetupAdding or Removing Device Keys from NetCommand Control Special Operation Methods Operating NetCommand-Controlled DevicesSpecial Operation Description and Setup How to Use Controlling Most Device TypesSP/EP More Key Menu and NetCommandNetCommand Specialized Device Keys Controlling Other A/V Receiver Functions Controlling an A/V Receiver After NetCommand SetupSwitching Audio to and from the A/V Receiver Controlling A/V Receiver PowerBefore You Begin Setting Up A/V Receiver ControlPower and Volume Setup to Control A/V Receiver Power and VolumeAutomatic Audio or Audio/Video Switching Before You Begin Case 3 Automatic Audio Video Switching via HdmiMore About Using an Hdmi Connection Open the Inputs Learn menu High-definitionDVD player Appendices Bypassing the Parental Lock Mitsubishi DLP Projection TVThis page intentionally left blank TV modes Appendix B Programming the Remote ControlFunctions Available for Other A/V Devices More MenusCode Verification Programming the Remote ControlAudio Lock Universal A/V Receiver Control Cable Boxes Programming CodesAudio Amplifiers VCRs Satellite ReceiversKTV GFMHI-Q KECDVD and Blu-ray Players JSI GPXIRT JMBDevice does not have CEC compatibility Action Appendix C Hdmi Control of CEC DevicesEnabling Hdmi Control of CEC Devices Optional Hdmi Control of an Hdmi A/V Receiver and Connected DevicesResolving CEC Conflicts Using Hdmi ControlLamp Part Number 915B403001 Lamp-Cartridge Replacement and CleaningAppendix D TV Care Removing the Old Lamp Cartridge Lamp-Cartridge ReplacementInstalling the New Lamp Cartridge Lamp-Cartridge Filter CleaningCare of the Remote Control Cleaning RecommendationsService Appendix E TroubleshootingTV Reset Comparison Guide Service and Customer SupportTions Initial Channel Edit menuNew Device Found screen Read the ON-SCREENGeneral TV Operation Symptom Remarks TV Power On/Off Symptom Remarks TV Channels Symptom RemarksSound Symptom Remarks Picture Symptom RemarksReceiver with Hdmi Control Receiver Set Up for Audio and Video Switching overAppendix E Troubleshooting Trademark and License Information Mitsubishi TV Software To Obtain Warranty Service Mitsubishi DLP Projection Television Limited WarrantyMitsubishi Digital Electronics AMERICA, INC This Limited Warranty does not CoverHdmi IndexIndex Page System Reset MDEAservice@mdea.com

837 Series, 737 Series, C9 SERIES specifications

Nikon has long been a respected name in the optics and imaging industry, and its C9 SERIES, 737 Series, and 837 Series binoculars exemplify the company’s commitment to quality and performance. Each series offers unique features that cater to different users, from outdoor enthusiasts to avid birdwatchers.

The C9 SERIES binoculars are designed for versatility and durability. They boast a robust construction, making them ideal for rugged outdoor conditions. With an advanced multilayer coating on the lenses, the C9 SERIES provides exceptional light transmission, ensuring bright and clear images even in low-light situations. The ergonomic design enhances user comfort, allowing for extended viewing sessions without fatigue. Additionally, the C9 SERIES is nitrogen-filled and O-ring sealed, making them waterproof and fog proof, which is essential for various climates.

Moving on to the 737 Series, these binoculars cater to users seeking sophistication paired with performance. Featuring high-definition optics, the 737 Series ensures superior resolution and color fidelity, elevating the viewing experience. The inclusion of phase-corrected prisms enhances image sharpness and contrast. With a sleek design and lightweight build, the 737 Series is perfect for travelers or those who need to carry their binoculars over long distances. The twist-up eyecups accommodate eyeglass wearers, providing an adaptable viewing experience.

Lastly, the 837 Series stands out with its advanced technology and premium features, aimed at serious nature observers or sports enthusiasts. The 837 Series binoculars come with a high magnification range, which allows for detailed views of distant subjects. Featuring ED (Extra-low Dispersion) glass, these binoculars minimize color fringing and provide exceptional clarity. The wide field of view and close-focus capabilities make them versatile for both distant wildlife watching and close-up observation. Additionally, the 837 Series incorporates a comfortable grip and durable materials, ensuring longevity in various environments.

In summary, Nikon's C9 SERIES, 737 Series, and 837 Series binoculars offer a range of options tailored to different needs. From rugged outdoor performance to high-definition clarity and advanced features, these binoculars embody Nikon’s dedication to excellence in optical technology. Users can find a reliable, high-quality pair of binoculars that suit their specific viewing requirements, whether for casual use or serious observation.