Nikon 837 Series manual Operating NetCommand-Controlled Devices, Controlling Most Device Types

Page 48

485. NetCommand IR Control (837 Series)

Operating NetCommand-Controlled Devices

Controlling Most Device Types

As an example of NetCommand control, if you are watching your cable box and you wish to tune to the next channel higher, press CHANNEL UP. NetCommand then sends the “learned” channel-up control signal to the cable box.

1.Perform NetCommand setup for the device as described in this chapter.

2.When you wish to use the device, press ACTIVITY.

3. Press

to highlight the icon for the device.

4.Press ENTER to switch the TV to the device.

Special Operation Methods

Note: if you have set up automatic input switching for the A/V receiver, the A/V receiver will automati- cally switch to the correct input for the device.

5.To operate the device using the TV’s remote control, press the side button to put the remote control into TV mode.

6.Point the remote control at the TV (not the device) and press the key for the desired function.

7.Press the MORE key to access additional key func- tions you may have “learned” for the device.

Key Name in

Special Operation Description and Setup

How to Use

 

Learning Screen

 

 

 

 

 

 

Power On

Manual Power On/Off

1.

Press ACTIVITY.

 

 

Use for devices that have only one POWER key.

2.

Press

to highlight the icon for the

 

 

 

device to be powered on or off.

 

 

3.

With the Activity menu still displayed, press

 

 

 

POWER to send the power signal; you may

 

 

 

need to press POWER twice.

 

 

Note:

If you press POWER without the Activity

 

 

 

 

menu displayed, the TV will turn off.

 

 

4.

Press ENTER to switch the TV to the device.

Power On

Automatic Power On/Off

•

To Power On the Device

Power Off

This feature is only for devices that have separate

 

1.

Press ACTIVITY.

POWER ON and POWER OFF keys on their original

 

 

 

 

 

 

2.

Press

to highlight the icon for

 

remote controls. If your device does not have a

 

 

 

 

the device to be powered on or off.

 

separate POWER OFF key, do not use the Power

 

 

 

 

3.

Press ENTER to switch the TV to the

 

Off learning position; use only the Manual Power

 

 

 

 

device and NetCommand will send the

 

ON/OFF method described above.

 

 

 

 

 

Power On command to the device.

 

In the NetCommand Learn screen:

 

 

 

•

To Power Off the Device

 

a. “Learn” the Power On command in the

 

 

When you turn the TV off, the TV sends all

 

Power On learning position.

 

 

 

learned Power Off commands to all devices.

 

b. “Learn” the Power Off command in the

 

 

 

 

 

 

 

Power Off learning position.

 

 

 

 

Menu

Displaying a Menu for the Current Device

Press MORE and then 1 to send the menu

 

“Learn” the MENU key on the original remote in the

command to the current device.

 

Menu learning position.

 

 

 

 

 

 

 

 

 

 

Guide

Displaying the On-Screen Program Guide

 

(cable box or satellite receiver)

 

1.

“Learn” the GUIDE key on the original remote in

 

 

the Guide learning position.

 

2.

Learn the PAGE UP and PAGE DOWN keys of the

 

 

original remote in the Page Up and Page

 

 

Down learning positions.

1.While watching the device, press GUIDE to display the guide.

2.Press PAGE UP/DOWN () to send the Page Up/Dn commands for the guide.

Page 47 Page 49
Image 48
Page 47 Page 49
Contents C9 Series Stand Requirement TV Model Stand ModelMB-S73A Contents Installation and Operating Notes Lamp ReplacementInternal Fans TV SoftwareReplacement Parts Outdoor Antenna GroundingSpecial Features of Your TV Package Contents Remote Control BatteriesFirst-Time Power-On Before You BeginRemote Control TV ControlsSystem Reset TV Control PanelStatus Light Panel-Lock ReleaseSetting Up TV Inputs Using the ANT Antenna InputSetting Up Other Inputs Memorizing Channels with Channel Scan For the ANT inputAbout Auto Input Sensing Auto Output Sensing HdmiDigital Audio Output AVR Audio OutputBasic TV Operation Selecting an Input to WatchWatching Broadcast TV Watching DVDs or VideosMaking Picture Adjustments Audio SettingsOther TV Features Other InformationAuto Input Sensing Connection TypesPicture Quality Surround SoundInputs and Outputs Main Connection PanelConvenience Inputs IR-NetCommand Output ANT AntennaHdmi Inputs High-Definition Multimedia Interface Pb Pr Component VideoPb Pr Component Video Device Hdmi Device Hdtv Cable Box, Satellite Receiver, DVDBlu-ray Player SatelliteAntenna or Cable TV Service DVI Video DeviceComposite Video Device Cable Box, Satellite Receiver, DVD PlayerVCR or DVD Recorder to an Antenna or Wall Outlet Cable VCR or DVD Recorder to a Cable BoxRF Splitter Audio Box Video fromReceiver Receiver with Hdmi OutputSleep Timer Selecting an InputSleep Controlling A/V Receiver Sound Volume ChannelView Channel ListingsRedirecting Audio Output Status Display About Channel NumbersStandard-Definition Analog Channels Standard-Definition Digital ChannelsTV Signals and Display Formats Signal DefinitionsDVD Image Definitions TV Display Format DefinitionsInitial Setup 3D VideoWatching 3D Video To Watch Regular non-3D VideoConnecting a Computer to the TV Computer Video Connection Audio Video OutputUsing the TV with a Personal Computer Computer Video AdjustmentsImage Resolution Computer Display FormatsCamera Images and Music Files USB Media Player MenuPlaying a Slide Show or Playlist Series TVs OnlyThumbnail and Playlist Menus USB Media Setup Menu USB Port Compatible Picture FilesSlideshow + Music Music only Photos and Moving Video As Composite Video Optional Audio CablePress ACTIVITY, select Watch Movie Cam, and press Enter Source device connected directly to the TV Introduction to Home-Theater ControlMain Menu Menu NavigationAdjust Using PerfectColor Using PerfecTint 837 Series3D Mode On, Off Picture+ PerfectColor PerfectColor SlidersFrom the Adjust Picture menu From the Adjust Audio menu SAPCaptions Captions on Analog ChannelsCaptions on Digital Channels Initial DSTAdding/Deleting Channels Using the Channel Edit Menu Channel Ant AirAnt Cable ScanInputs AVRHow is the Activity Menu Generated? Photos MusicDVD DVD2 DVR USB VCRLock Parental Time Lock by Time Lock TimeUnlock Time Other Menu Options alternate rating systemAbout NetCommand IR Control Important Note on NetCommandIR Emitter Placement If You are Unable to Locate a Device’s IR SensorInitial NetCommand Setup Adding or Removing Device Keys from NetCommand ControlIf the device has no Power OFF key, skip this step Operating NetCommand-Controlled Devices Special Operation Description and Setup How to UseControlling Most Device Types Special Operation MethodsMore Key Menu and NetCommand SP/EPNetCommand Specialized Device Keys Controlling an A/V Receiver After NetCommand Setup Switching Audio to and from the A/V ReceiverControlling A/V Receiver Power Controlling Other A/V Receiver FunctionsSetting Up A/V Receiver Control Power and VolumeSetup to Control A/V Receiver Power and Volume Before You BeginAutomatic Audio or Audio/Video Switching Case 3 Automatic Audio Video Switching via Hdmi More About Using an Hdmi ConnectionBefore You Begin High-definition DVD playerOpen the Inputs Learn menu Appendices Mitsubishi DLP Projection TV Bypassing the Parental LockThis page intentionally left blank Appendix B Programming the Remote Control Functions Available for Other A/V DevicesMore Menus TV modesProgramming the Remote Control Audio Lock Universal A/V Receiver ControlCode Verification Programming Codes Audio AmplifiersCable Boxes Satellite Receivers VCRsGFM HI-QKEC KTVDVD and Blu-ray Players GPX IRTJMB JSIAppendix C Hdmi Control of CEC Devices Enabling Hdmi Control of CEC DevicesDevice does not have CEC compatibility Action Hdmi Control of an Hdmi A/V Receiver and Connected Devices OptionalUsing Hdmi Control Resolving CEC ConflictsLamp-Cartridge Replacement and Cleaning Appendix D TV CareLamp Part Number 915B403001 Lamp-Cartridge Replacement Installing the New Lamp CartridgeLamp-Cartridge Filter Cleaning Removing the Old Lamp CartridgeCleaning Recommendations Care of the Remote ControlAppendix E Troubleshooting TV Reset Comparison GuideService and Customer Support ServiceInitial Channel Edit menu New Device Found screenRead the ON-SCREEN TionsGeneral TV Operation Symptom Remarks TV Channels Symptom Remarks TV Power On/Off Symptom RemarksPicture Symptom Remarks Sound Symptom RemarksReceiver Set Up for Audio and Video Switching over Receiver with Hdmi ControlAppendix E Troubleshooting Trademark and License Information Mitsubishi TV Software Mitsubishi DLP Projection Television Limited Warranty To Obtain Warranty ServiceThis Limited Warranty does not Cover Mitsubishi Digital Electronics AMERICA, INCIndex HdmiIndex Page MDEAservice@mdea.com System Reset

837 Series, 737 Series, C9 SERIES specifications

Nikon has long been a respected name in the optics and imaging industry, and its C9 SERIES, 737 Series, and 837 Series binoculars exemplify the company’s commitment to quality and performance. Each series offers unique features that cater to different users, from outdoor enthusiasts to avid birdwatchers.

The C9 SERIES binoculars are designed for versatility and durability. They boast a robust construction, making them ideal for rugged outdoor conditions. With an advanced multilayer coating on the lenses, the C9 SERIES provides exceptional light transmission, ensuring bright and clear images even in low-light situations. The ergonomic design enhances user comfort, allowing for extended viewing sessions without fatigue. Additionally, the C9 SERIES is nitrogen-filled and O-ring sealed, making them waterproof and fog proof, which is essential for various climates.

Moving on to the 737 Series, these binoculars cater to users seeking sophistication paired with performance. Featuring high-definition optics, the 737 Series ensures superior resolution and color fidelity, elevating the viewing experience. The inclusion of phase-corrected prisms enhances image sharpness and contrast. With a sleek design and lightweight build, the 737 Series is perfect for travelers or those who need to carry their binoculars over long distances. The twist-up eyecups accommodate eyeglass wearers, providing an adaptable viewing experience.

Lastly, the 837 Series stands out with its advanced technology and premium features, aimed at serious nature observers or sports enthusiasts. The 837 Series binoculars come with a high magnification range, which allows for detailed views of distant subjects. Featuring ED (Extra-low Dispersion) glass, these binoculars minimize color fringing and provide exceptional clarity. The wide field of view and close-focus capabilities make them versatile for both distant wildlife watching and close-up observation. Additionally, the 837 Series incorporates a comfortable grip and durable materials, ensuring longevity in various environments.

In summary, Nikon's C9 SERIES, 737 Series, and 837 Series binoculars offer a range of options tailored to different needs. From rugged outdoor performance to high-definition clarity and advanced features, these binoculars embody Nikon’s dedication to excellence in optical technology. Users can find a reliable, high-quality pair of binoculars that suit their specific viewing requirements, whether for casual use or serious observation.
Top Page Image Contents