Nikon 837 Series, C9 SERIES manual TV Control Panel, Status Light, System Reset, Panel-Lock Release

Page 9

1. Basic Setup and Operation

9

TV Controls, continued

TV Control Panel

Buttons on the control panel duplicate some keys on the remote control.

Refer to upper labels when no TV menus are dis- played.

Refer to lower labels when using TV menus or after activating a special function.

STATUS POWER

737 and C9 series. Flip open cover to use buttons on the front panel.

Controls on 737 and C9 series TVs. 837 series controls are similar and are located next to the STATUS indicator.

STATUS Light

Key

Off

Steady On

Slow Blinking

Fast Blinking

System Reset

If the TV fails to respond to the remote control, the control-panel buttons, or will not power on/off, perform System Reset. Recent setting changes made before using System Reset may be lost.

To perform System Reset, press and hold the POWER button on the control panel for ten seconds.

Panel-Lock Release

To release the Panel Lock from the TV control panel, press and hold the ACTIVITY button on the control panel for ten seconds. You can release the Panel Lock with the TV powered either on or off.

To activate the Panel Lock, use the Lock menu, page 44.

If You Power Off the TV by Mistake

1.Press POWER again, within about 60 seconds, to have the TV come back on immediately.

2.If the status indicator starts rapidly blinking green (about 60 seconds after you shut off power), wait a few moments for the status indi- cator to stop blinking and press POWER to turn the TV on again.

LED Color

TV Condition

Additional Information

 

 

 

None

TV is powered off.

Normal operation.

 

 

 

Green

TV is powered on.

Normal operation.

 

 

 

Green

TV powered off, auto-on TV Timer

Normal operation. TV can be turned on at any time.

is set.

 

 

 

 

 

 

Green

TV just powered off and lamp is

LED starts to blink 60 seconds after turning off TV. TV can be

cooling.

turned back on before blinking starts or after blinking stops, but

 

 

 

 

not while the indicator is blinking. Normal operation.

 

 

 

 

Yellow

1.

Lamp failure

Replace the lamp. See “Lamp-Cartridge Replacement and

 

 

Cleaning” on page 69.

 

2.

No lamp installed.

 

 

Red

Lamp access door is open or not

TV will not operate until lamp access door is secured. See

secure.

“Lamp-Cartridge Replacement and Cleaning” on page 69.

 

 

 

 

Red

TV may require service.

Turn off the TV and unplug the set from the AC power source.

 

 

Wait one minute and then plug the set back in. See Appendix E.

 

 

 

 

 

 

If the red LED is still on, contact your dealer or a Mitsubishi

 

 

 

Authorized Service Center. Go to www.mitsubishi-tv.com or call

 

 

 

1-800-332-2119 to receive Authorized Service Center information.

 

 

 

 

Image 9
Contents C9 Series Stand Requirement TV Model Stand ModelMB-S73A Contents Lamp Replacement Installation and Operating NotesInternal Fans TV SoftwareOutdoor Antenna Grounding Replacement PartsSpecial Features of Your TV Remote Control Batteries Package ContentsFirst-Time Power-On Before You BeginTV Controls Remote ControlTV Control Panel System ResetStatus Light Panel-Lock ReleaseUsing the ANT Antenna Input Setting Up TV InputsSetting Up Other Inputs Memorizing Channels with Channel Scan For the ANT inputHdmi About Auto Input Sensing Auto Output SensingDigital Audio Output AVR Audio OutputSelecting an Input to Watch Basic TV OperationWatching Broadcast TV Watching DVDs or VideosAudio Settings Making Picture AdjustmentsOther TV Features Other InformationConnection Types Auto Input SensingPicture Quality Surround SoundInputs and Outputs Main Connection PanelConvenience Inputs ANT Antenna IR-NetCommand OutputHdmi Inputs High-Definition Multimedia Interface Pb Pr Component VideoHdtv Cable Box, Satellite Receiver, DVD Pb Pr Component Video Device Hdmi DeviceBlu-ray Player SatelliteDVI Video Device Antenna or Cable TV ServiceComposite Video Device Cable Box, Satellite Receiver, DVD PlayerVCR or DVD Recorder to a Cable Box VCR or DVD Recorder to an Antenna or Wall Outlet CableRF Splitter Audio Box Video fromReceiver with Hdmi Output ReceiverSleep Timer Selecting an InputSleep Controlling A/V Receiver Sound Volume ChannelView Channel ListingsRedirecting Audio Output About Channel Numbers Status DisplayStandard-Definition Analog Channels Standard-Definition Digital ChannelsSignal Definitions TV Signals and Display FormatsDVD Image Definitions TV Display Format Definitions3D Video Initial SetupWatching 3D Video To Watch Regular non-3D VideoComputer Video Connection Audio Video Output Connecting a Computer to the TVComputer Video Adjustments Using the TV with a Personal ComputerImage Resolution Computer Display FormatsUSB Media Player Menu Camera Images and Music FilesPlaying a Slide Show or Playlist Series TVs OnlyThumbnail and Playlist Menus USB Media Setup Menu USB Port Compatible Picture FilesSlideshow + Music Music only Photos and Moving Video As Composite Video Optional Audio CablePress ACTIVITY, select Watch Movie Cam, and press Enter Introduction to Home-Theater Control Source device connected directly to the TVMenu Navigation Main MenuAdjust Using PerfecTint 837 Series Using PerfectColor3D Mode On, Off Picture+ PerfectColor PerfectColor SlidersFrom the Adjust Picture menu SAP From the Adjust Audio menuCaptions Captions on Analog ChannelsCaptions on Digital Channels DST InitialChannel Ant Air Adding/Deleting Channels Using the Channel Edit MenuAnt Cable ScanAVR InputsPhotos Music How is the Activity Menu Generated?DVD DVD2 DVR USB VCRLock Parental Lock Time Time Lock by TimeUnlock Time Other Menu Options alternate rating systemImportant Note on NetCommand About NetCommand IR ControlIf You are Unable to Locate a Device’s IR Sensor IR Emitter PlacementInitial NetCommand Setup Adding or Removing Device Keys from NetCommand ControlIf the device has no Power OFF key, skip this step Special Operation Description and Setup How to Use Operating NetCommand-Controlled DevicesControlling Most Device Types Special Operation MethodsSP/EP More Key Menu and NetCommandNetCommand Specialized Device Keys Switching Audio to and from the A/V Receiver Controlling an A/V Receiver After NetCommand SetupControlling A/V Receiver Power Controlling Other A/V Receiver FunctionsPower and Volume Setting Up A/V Receiver ControlSetup to Control A/V Receiver Power and Volume Before You BeginAutomatic Audio or Audio/Video Switching Case 3 Automatic Audio Video Switching via Hdmi More About Using an Hdmi ConnectionBefore You Begin High-definition DVD playerOpen the Inputs Learn menu Appendices Bypassing the Parental Lock Mitsubishi DLP Projection TVThis page intentionally left blank Functions Available for Other A/V Devices Appendix B Programming the Remote ControlMore Menus TV modesProgramming the Remote Control Audio Lock Universal A/V Receiver ControlCode Verification Programming Codes Audio AmplifiersCable Boxes VCRs Satellite ReceiversHI-Q GFMKEC KTVDVD and Blu-ray Players IRT GPXJMB JSIAppendix C Hdmi Control of CEC Devices Enabling Hdmi Control of CEC DevicesDevice does not have CEC compatibility Action Optional Hdmi Control of an Hdmi A/V Receiver and Connected DevicesResolving CEC Conflicts Using Hdmi ControlLamp-Cartridge Replacement and Cleaning Appendix D TV CareLamp Part Number 915B403001 Installing the New Lamp Cartridge Lamp-Cartridge ReplacementLamp-Cartridge Filter Cleaning Removing the Old Lamp CartridgeCare of the Remote Control Cleaning RecommendationsTV Reset Comparison Guide Appendix E TroubleshootingService and Customer Support ServiceNew Device Found screen Initial Channel Edit menuRead the ON-SCREEN TionsGeneral TV Operation Symptom Remarks TV Power On/Off Symptom Remarks TV Channels Symptom RemarksSound Symptom Remarks Picture Symptom RemarksReceiver with Hdmi Control Receiver Set Up for Audio and Video Switching overAppendix E Troubleshooting Trademark and License Information Mitsubishi TV Software To Obtain Warranty Service Mitsubishi DLP Projection Television Limited WarrantyMitsubishi Digital Electronics AMERICA, INC This Limited Warranty does not CoverHdmi IndexIndex Page System Reset MDEAservice@mdea.com

837 Series, 737 Series, C9 SERIES specifications

Nikon has long been a respected name in the optics and imaging industry, and its C9 SERIES, 737 Series, and 837 Series binoculars exemplify the company’s commitment to quality and performance. Each series offers unique features that cater to different users, from outdoor enthusiasts to avid birdwatchers.

The C9 SERIES binoculars are designed for versatility and durability. They boast a robust construction, making them ideal for rugged outdoor conditions. With an advanced multilayer coating on the lenses, the C9 SERIES provides exceptional light transmission, ensuring bright and clear images even in low-light situations. The ergonomic design enhances user comfort, allowing for extended viewing sessions without fatigue. Additionally, the C9 SERIES is nitrogen-filled and O-ring sealed, making them waterproof and fog proof, which is essential for various climates.

Moving on to the 737 Series, these binoculars cater to users seeking sophistication paired with performance. Featuring high-definition optics, the 737 Series ensures superior resolution and color fidelity, elevating the viewing experience. The inclusion of phase-corrected prisms enhances image sharpness and contrast. With a sleek design and lightweight build, the 737 Series is perfect for travelers or those who need to carry their binoculars over long distances. The twist-up eyecups accommodate eyeglass wearers, providing an adaptable viewing experience.

Lastly, the 837 Series stands out with its advanced technology and premium features, aimed at serious nature observers or sports enthusiasts. The 837 Series binoculars come with a high magnification range, which allows for detailed views of distant subjects. Featuring ED (Extra-low Dispersion) glass, these binoculars minimize color fringing and provide exceptional clarity. The wide field of view and close-focus capabilities make them versatile for both distant wildlife watching and close-up observation. Additionally, the 837 Series incorporates a comfortable grip and durable materials, ensuring longevity in various environments.

In summary, Nikon's C9 SERIES, 737 Series, and 837 Series binoculars offer a range of options tailored to different needs. From rugged outdoor performance to high-definition clarity and advanced features, these binoculars embody Nikon’s dedication to excellence in optical technology. Users can find a reliable, high-quality pair of binoculars that suit their specific viewing requirements, whether for casual use or serious observation.