Nokia 9650S owner manual Welcome Menu, Language Settings, Antenna and Satellite Configuration

The Welcome Menu

To install the Mediamaster properly you have to adjust a few settings. You will always be guided by the information at the bottom of the menus. When you have finished the final part of the setup procedure you can start watching TV channels and listening to radio channels. Now you should have the “Welcome Menu” on the TV screen. Press the OK button to proceed.

Language Settings

Select the menu language that you desire. This will define the language shown in the menus. This will also be the main language for all the other parts such as audio and subtitling languages. Press the OK button to proceed.

#"Installation

In order to configure your equipment (satellite dish and LNB) you will need to use the following menus.

The LNB is the receiving unit, which is mounted on the satellite dish. For the following setup procedure you have to know the Local Oscillator (LO) frequency valid for your LNB(s).

Antenna and Satellite Configuration

Highlight “Antenna Satellite Configuration” and press the OK button. You can configure the antenna for each satellite from this menu.

Antenna Alternative:

Select an Antenna alternative from “1 to 16”. Please note, that the parameters in the menu are pre-programmed, but you can change any of them to suit your combination.

GB 12