Nokia 9650S LNB/Tuner input Audio Output, Serial Data, Conditional access system, Demodulator

TECHNICAL SPECIFICATION

Transmission Standards		VCR SCART
DVB,MPEG2		CVBS, Audio
LNB/Tuner input		Audio Output
Connector	2 x F-type	Hi-Fi 2 RCA Jack
	(Loop Through)
Input frequency	950-2150MHz	Serial Data
Max Current	500mA max	9pin D-sub RS232C signal
Supply Voltage	13V/18V	Baud rates		115200baud max
DiSEqC	1.0
RF Impedance	75 ohm	Conditional access system
		Twin PCMCIA interface for a Common Interface
Demodulator		CA module (DVB Standard)
QPSK
Symbol rate	2-45 Msym/s	Remote Controller
SCPC and MCPC		Type		RC4661
		Operating distance		10 meters
Video decoder		Batteries		2 x 1,5V AAA
MPEG-2 Main Profile @ Main Level
Data rates	up to 15Mbit/s	Rear Panel Interfaces
Video formats	4:3(letterbox),	LNB IF IN/OUT
	4:3(Pan & Scan)	RF modulator IN/OUT
	16:9	2 x SCART for TV and VCR
Audio decoder		2 x RCA Audio (L/R)
MPEG-2 layer 1 & 2		1 x RCA Video (CVBS)
Stereo, Mono, Dual channel, Joint stereo		RS232C (9pin D-Sub)
		Modem (9pin D-sub)
System resources
Processor	108MHz MIPS 32bits	General Data
CPU RAM	2Mbytes	Operating Temperature		10	°	°
						C to 45 C
MPEG RAM	2Mbytes	Storage temperature			°	°
				-40 C to +70 C
Flash ROM	2Mbytes	Supply Voltage		96-264V AC,
Resolution	720 x 576			48Hz-60Hz
OSD	16 colors	Power Consumption	Max	29W
				at 500mA LNB
RF Modulator				Load
Output Channel	21-69	Power Consumption	in
Output Signal	PAL B/G/I	Standby		9W
Input/Output Connectors	IEC169-2
male/female		Dimension (W x D x H)		380x241x69mm
Preset Channel	43	Weight		2Kg

TV SCART

RGB, CVBS, Audio

GB 27