Reinstall
This will start the Installation procedure from the “Welcome Menu”.
When you press OK in the “Welcome Menu” again,
be aware of the fact, that all previous channels and settings will be erased! To exit the ”Reinstall” menu without erasing any channels, press “Back”.
System Information
This gives general information about which hardware and software version your Mediamaster is running on.
CONDITIONAL ACCESS
This menu will only be activated if you have inserted a valid Smartcard in the slot behind the front lid.
From here you will get access to information and menus connected to the Common Interface(CA) Module.
This information may vary a lot depending on the Service Provider.
If more than one CA system is activated, select the one from which you want information.
Please see the documentations delivered together with your CA Module.
GB 24