Nokia 9650S Connecting to a TV and a Video recorder, If Your VCR does not have a Scart connector

Page 6

Connecting to a TV and a Video recorder

Refer to your video recorder manual for full instructions. !" Connect one SCART cable between the main

SCART socket on the TV and the TV SCART socket on the Mediamaster.

!" Connect another SCART cable between the VCR and the VCR SCART socket on the Mediamaster.

!" Connect the RF cable from the RF output on the VCR to the TV aerial input on the TV.

!" Connect the TV aerial to the RF input socket on the VCR.

If Your VCR does not have a SCART connector

!" Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.

!" Connect an RF cable from the RF output on the VCR to the TV aerial input on the TV.

!" Connect an RF cable from the TV/VCR output on the Mediamaster to the RF input socket on the VCR.

!" Connect the TV aerial to the TV AERIAL input socket on the Mediamaster.

Connecting to an Analogue satellite receiver and a Video recorder

!" Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.

!" Connect a SCART cable between the VCR and the VCR SCART socket on the Mediamaster.

!" Connect an RF cable from the RF output on the VCR to the TV aerial input on the TV.

!" Connect an RF cable from the RF output on the Analogue receiver to the RF input socket on the VCR.

!" Connect the TV aerial to the RF input socket on the Analogue receiver.

In order to switch the signal from the dish between the analogue and digital receivers, you need a Universal Twin LNB.

!" Cable A between output A on the LNB to the LNB socket on the analogue receiver. !" Cable B between output B on the LNB to the ANTENNA socket on the Mediamaster.

Both the VCR and the analogue satellite receiver must be tuned to different UHF channels (than the Mediamaster) when using RF-connectors.

GB 7

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Mediamaster Contents Mediamaster 9650SFor Your Safety Rear panelInstallation of the Mediamaster Front panelInstalling the satellite dish Connecting the Mediamaster to the satellite dishConnecting the Mediamaster to a TV set If you need to fit the F-connectors onto the cableConnecting to a TV and a Video recorder If Your VCR does not have a Scart connectorConnecting to Hi Fi system Preparing the remote controlBefore you continue About the Smart Card and CA Module CA module with SmartcardRemote Control + PTuning your TV to the Mediamaster Basic SettingsTuning procedure when RF connections are used Please noteWelcome Menu Language SettingsAntenna and Satellite Configuration Antenna AlternativeAutomatic Channel Search Switch Type22KHz Tone Switch LNB TypeManual Channel Search Viewing TVGeneral Information Select Channel TV Screen FormatStart/Stop Watching TV Program Information. The i ButtonRadio Button Volume LevelTV Guide List of TV ChannelsVideo Recorder Setting from the Main MenuList of Radio Channels Subtitling and Teletext. The Text ButtonTV Channels and Radio Channels TV Guide and Radio GuideEdit Channels Add Channels Rearrange ListRename List Lock ChannelsUser Preferences Rearrange ChannelsRemove Channels Parental ControlSystem Settings On/Off Timer Setting Time SettingGame Installation Submenus Antenna Satellite ConfigurationAdvanced Channel Search Reinstall Conditional AccessSystem Information Access code MHz Glossary of TermsProblem Solving Problem Possible causes What to doLNB/Tuner input Audio Output Conditional access systemRemote Controller Serial DataFirst Time Installation Menus Screen Structure
Top Page Image Contents