Nokia 9650S owner manual Manual Channel Search, Viewing TV, General Information

Page 13

Manual Channel Search

You can use manual channel search if you want to add new channels later. For example If you have a special antenna configuration which is not assigned in the “Antenna alternative” menu, you can add new channels using the “manual channel search” function. When you perform a Manual Search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available in magazines covering satellite TV reception, on the Internet or from your Service Provider.

Antenna Alternative: Select Antenna Alternative “1 to 16” that corresponds to the antenna which you wants to use for the search.

Transponder Freq (MHz): Specify the frequency in GHz. using the numbered buttons on your remote control. If you enter the wrong number, erase it with the left arrow button.

Polarization: Select polarization; “Horizontal” or “Vertical”.

Symbol Rate (Msym/S): Enter the rate with the numbered buttons.

FEC: Enter the appropriate Forward Error Correction (FEC) value or select “Auto”.

Network Search: Select: “Yes” to search from all transponders used by a specific Service Provider.

(“Yes” is the default setting). Select “No” to search only from the transponder that you have entered on the line “Transponder Frequency”. (Useful if you do not want to search through all transponders for a specific program distributor).

By pressing the OK button you can now enter the channel search menu where the Mediamaster starts to search for channels from the satellite.

VIEWING TV

General Information

The following will describe the basic functions of your Mediamaster while watching TV or listening to radio channels.

Sometimes the information may not be displayed as illustrated. Many of the functions described here are dependent on the Service Provider and/or can only be used if they are included in the transmitted programme information.

Please note that during the Channel Search procedure, the Mediamaster has downloaded ALL available channels. This may include channels from various Service Providers, also those to which you normally do not have access. If you select a programme to which you do not have access, you will get the message “Service is scrambled or not running” on the screen.

GB 14

Image 13
Contents Mediamaster Mediamaster 9650S ContentsRear panel For Your SafetyFront panel Installation of the MediamasterConnecting the Mediamaster to a TV set Connecting the Mediamaster to the satellite dishInstalling the satellite dish If you need to fit the F-connectors onto the cableIf Your VCR does not have a Scart connector Connecting to a TV and a Video recorderPreparing the remote control Connecting to Hi Fi systemBefore you continue CA module with Smartcard About the Smart Card and CA Module+ P Remote ControlTuning procedure when RF connections are used Basic SettingsTuning your TV to the Mediamaster Please noteAntenna and Satellite Configuration Language SettingsWelcome Menu Antenna Alternative22KHz Tone Switch Switch TypeAutomatic Channel Search LNB TypeViewing TV Manual Channel SearchGeneral Information Start/Stop Watching TV TV Screen FormatSelect Channel Program Information. The i ButtonTV Guide Volume LevelRadio Button List of TV ChannelsList of Radio Channels Setting from the Main MenuVideo Recorder Subtitling and Teletext. The Text ButtonTV Guide and Radio Guide TV Channels and Radio ChannelsEdit Channels Rename List Rearrange ListAdd Channels Lock ChannelsRemove Channels Rearrange ChannelsUser Preferences Parental ControlSystem Settings Time Setting On/Off Timer SettingGame Antenna Satellite Configuration Installation SubmenusAdvanced Channel Search Conditional Access ReinstallSystem Information Glossary of Terms Access code MHzProblem Possible causes What to do Problem SolvingRemote Controller Conditional access systemLNB/Tuner input Audio Output Serial DataMenus Screen Structure First Time Installation