Lenco Marine PL 4201 operating instructions Basic Operation, Channel selection

Basic Operation

Channel selection

With the 10 number buttons.

Example:

•No. 2: Press 0 and within 2 seconds, press 2. The station stored in the 2nd store position will appear.

•No. 29: Press 2 and within 2 seconds, press 9. The station stored in the 29th store position will appear.

Press or to change to the program forward or backward. The changing takes approx. 2 seconds. If the auto search stored only 5 stations, these only 5 also will appear. Still uncovered or hidden store position (see P.34) will not appear.

QuickView

Note:

If the built-in tuner does not receive anything (e.g. if no antenna is connected) during TV-operation, then the TV-unit will change to standby after approx. 15 minutes.

button allows you to go back to the last selected channel.

Volume adjusting

Press or to adjust the volume. The volume level disappears after 4 seconds.

MUTE
Press . The sound will be cut off. MUTE will appear for
approx. 4 seconds.
The muting can be released by pressing		again or	or	.
DISPLAY	￿￿￿￿￿￿		￿￿￿
Press DISPLAY.
Channel number
and wide screen
type will appear.	￿￿￿￿
The display will
disappear after 4
seconds.

STATUS

Press STATUS. The clock and a program information will appear approx. 2 seconds later, if the station supported.

SLEEP TIMER

Press . SLEEP	￿￿￿￿￿￿
and the minutes
until the shut-off
will appear. Each
time you press
the number near
SLEEP will
change.
When the
displayed time
runs out, the unit will switch to standby. The display will
disappear after approx. 4 seconds.

To cancel the sleep time:

Press repeatedly until “0” appears.

17

3U84011A [E] P11-18 17 20/12/05, 15:21