Lenco Marine PL 4201 operating instructions DVD player, Connect with various unit

Select the “MONITOR” position in menu. (see P.36 paragraph 5-2)

Select AV1-INPUT (see P.11). You can see playback-picture of videorecorder 1.

This signal does output via AV-2 and can be recorded by videorecorder 2. Videorecorder 2 does precisely record, what you see on the screen.

Connection￿￿￿￿￿￿￿￿￿￿￿￿to other equipment

1. Connect with various unit

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿
		￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿
￿￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

DVD player:

For best picture quality, select RGB-PLAYBACK on the DVD player (see Owner’s manual of the DVD player). Always connect the DVD player to AV1 or AV3. AV1 and AV3-Scart socket can perform RGB- playback. Press 0/AV on the TV-remote control repeatedly until AV1 appears.

Notes:

•S-Video can be playback with the Scart socket AV2 or side AV input AV4 (see page 36). If you wish to utilize S-Video at Scart socket AV2, use an optional S-Video-to-SCART-Adaptor. (not supplied)

•RGB provide best-possible picture quality. Therefore in case of RGB-signal’s playback, color- and also sharpness-adjustment can not be available.

Example: You will perform the color-adjustment as explained on P.23. During you adjust color with remote control, the color level indicated on menu actually changes, however the displayed true color- strength constantly remains with no-change.

•￿￿￿￿￿The DVD￿￿￿￿￿￿￿￿￿player￿always￿￿￿￿￿must be connected to TV-unit directly. It must not be connected to a video recorder. Many DVDs are equipped with a copy-guard. These copy-guard causes reception disturbance if the DVD player had been connected to a video recorder.

2. Two video recorder connection￿￿(e￿￿￿￿￿.g. to￿￿￿￿￿duplicate a video tape)

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

35

3U84011A [E] P35-BACK 35 20/12/05, 15:22