Lenco Marine PL 4201 operating instructions Manual TV station presetting

Manual TV station presetting

Usually Automatic station presetting stores all stations of each reception-area. In case of bad receiving condition, some broadcasts may not be stored. These stations can also be stored manually.

Example: Preset the ZDF on program position 2.

1 Select MANUAL TUNING. Then press .

	A U T O T U N I N G
	M A N U A L T U N I N G
	C H A L L O C A T I O N
	T E X T L A N G U A G E		W E S T
	L A N G U A G E		E N G L I S H
		: SELECT	: ADJUST
			MENU : RETURN
2 Press	or	to select PAL or SECAM-L.
Then press ENTER.			￿￿￿

Notes:

•The auto search stops at the best receiving position automatically.

A manual fine tuning is normally not necessary. If want, you can do the manual fine tuning additionally. In step 3, when the auto search

stopped at each station, press

or until the desired fine tuning achieved.

Then press ENTER.

•The search moves up to the next station position automatically. If

want, you can also hold the search

manually. Press or at the desired position. The search keeps hold. If want, do the fine tuning as the description above.

		: ADJUST
	ENTER : SET	MENU : RETURN
3 Press	. The auto search starts forward. It will stop at
each station with good reception. Press			again until you
receive the ZDF￿￿￿. Then press ENTER￿.￿￿

: F.TUNE : SEARCH

ENTER : SETMENU : RETURN

4 The channel position number will be highlighted. Press

or repeatedly until the number next to CH change to 2. Then press ENTER.

The ZDF was￿now￿￿ stored in the channel position CH 2.

: SELECT

ENTER : SETMENU : RETURN

5 Repeat the steps 2 and 4 to preset other TV stations.

6 Press MENU repeatedly until the MENU disappears.

15

3U84011A [E] P11-18 15 20/12/05, 15:21