Lenco Marine PL 4201 operating instructions Full White/Screen Saver/Static Image

Page 27

Full White/Screen Saver/Static Image

Full White

Aids recovery of retained images on the screen.

Select FULL WHITE.

Then press .


: SELECT	: ADJUST
	MENU : RETURN

MENU disappears and the picture showing on the screen will be replaced with a white screen. The screen will return to normal when any button is pressed.

Screen Saver

Moves the picture on the screen in small increments continuously to reduce the image retention of stationary images i.e. channel identification.logo etc.

1 Select SCREEN
SAVER.
Then press	or
to select ON
or OFF.
		: SELECT	: ADJUST
			MENU : RETURN

2 Press MENU repeatedly until the MENU disappears.

Static Image

Automatically reduce the brightness in small steps if a static (stationary) image is displayed for a long time. The speed and delay time of this function will depend upon the brightness of displayed picture.

1 Select STATIC IMAGE.

Then press or to select ON

or OFF.

: SELECT : ADJUST MENU : RETURN

2 Press MENU repeatedly until the MENU disappears.

27

3U84011A [E] P26-34

27

20/12/05, 15:22

Image 27

Contents Plasma Colour Television Headphone-Warning FeaturesBattery notice Power save noticeContents Safety note Important notice, InstallationImportant notice, Installation If not, eyes will strain Moving the unit or carrying by handRemote sensor Loudspeakers Description of Indicators and ControlsLocation of controls Left Side Front SideRemote Control Remote Control Install the batteriesDistance of Remote Control Operation Hdmi input See PC Monitor input PC See Antenna connectionCall Menu and for example Select Auto Tuning Quick guide for MENU-operationPreparation Select Text Language Then press To select West or East On-screen Language SelectionTeletext Language Selection Select Language Then pressAutomatic station presetting with the built-in Tuner SystemPress Change the order of stored channel Press To select PAL or SECAM-L Then press Enter Manual TV station presettingConnection to Satellite Receiver Plasma televisionScart-cable not supplied Channel selection Basic OperationTimer functions Select OFF if you want no NICAM-reception Stereo reception with the built-in tunerNicam stereo sound reception Select Nicam PressStereo reception with the built-in tuner Bass, Treble and Balance Select BASS. Then press or to adjust the bassSelecting the BBE/Turning off the built-in speakers Selecting the BBETurning off the built-in speakers Select DNR. Then press Brightness, Contrast, Colour and Sharpness/DNRBrightness, Contrast, Colour and Sharpness Select BRIGHTNESS. Then pressBlue back Selecting the color temperature/Blue backSelecting the color temperature Mode Picture Quality149 Manual format settingPicture format 169Or Full Scrolling the CINEMA-Wide picture/Auto 43 DefaultAuto 43 Default Scrolling the CINEMA-wide pictureStatic Image Full White/Screen Saver/Static ImageFull White Screen SaverUsing the panel lock feature To change passwordTo unlock the panel Select PC input PC-SettingAudio Menu PC-SettingPress To select CONTRAST. Then Picture Menu Brightness and Contrast can be set as youSupplied Connecting an Hdmi or a DVI device to the Hdmi inputHdmi cable type a connector Not supplied Selecting the Hdmi audio input sourceSelect Switch on / off TeletextTeletext TOPtextTeletext Conceal stored channels Cancel Concealment of ChannelsConnect with various unit DVD playerConnect to a Video camera or Video player Connecting an audio systemSetting of Scart socket AV2 Connection to other equipmentAV-Color adjusting Connect with another equipment See pages 35Press Menu, select AV Colour Troubleshooting table / Specifications Troubleshooting tableSpecifications 3U84011A E P35-BACK 20/12/05 J3U84011A SH 06/02