Lenco Marine PL 4201 operating instructions Change the order of stored channel

Change the order of stored channel

The Automatic station presetting stores the found station in a specific order. This order can be changed.

Note:

To arrange all channels, begin with program 1.

Furthermore, continue this procedure to select the broadcast that should be seen on program-position 2, 3, 4 and so on.

14

1 Select CH ALLOCATION.
Then press	.
A U T O T U N I N G
M A N U A L T U N I N G
C H A L L O C A T I O N
T E X T L A N G U A G E		W E S T
L A N G U A G E		E N G L I S H
	: SELECT	: ADJUST
		MENU : RETURN
2 Press	or	until the position number that
you want to move appears (e.g. CH 40), then press
ENTER. ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
3 Press	or	until the program-position on
￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿￿￿
which you want to put the moving program appears (e.g.
CH 5), then press ENTER.
￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿￿￿￿￿￿￿￿￿

4 The original program 40 is now stored in memory position 5.

To arrange the other channels, repeat this procedure or...
	￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿
	￿￿￿￿￿￿￿￿￿￿￿￿

5 Press MENU repeatedly until the MENU disappears.

3U84011A [E] P11-18 14 20/12/05, 15:21