Lenco Marine PL 4201 operating instructions PC-Setting, Select PC input

Page 29

PC-Setting

In general, a vacuum tube monitor is equipped for your PC. Before you connect this PDP-Monitor to your PC, change the adjustment of your PC's graphic card. Otherwise any picture will not appear on the PDP- Monitor. Turn on your PC (still with your old Monitor) and select under 1280 x 768 for on-screen graphic resolution. Select under 60 Hz for on-screen refresh rate. Turn off your PC and connect the turned off Plasma-TV.

Use the optional PC-VGA cable (not supplied) to connect the PDP-Monitor with your PC. Plug the cable carefully not to break or bend the contact inside of plug.

VGA Cable (not supplied)

Select PC input

Turn on the Plasma-TV again.

Press 0/AV repeatedly until “PC” appears on the TV screen.

See next page for PC Monitor Menu.

Note:

If there is no video signal from the computer when the unit is in PC mode, “No Signal” will appear on the TV-screen for approx. 10 seconds.

Note:

The PC Monitor Menu settings are not effective for normal TV-mode or external input mode.

29

3U84011A [E] P26-34

29

20/12/05, 15:22

Image 29

Contents Plasma Colour Television Battery notice FeaturesPower save notice Headphone-WarningContents Safety note Important notice, InstallationImportant notice, Installation If not, eyes will strain Moving the unit or carrying by handLocation of controls Description of Indicators and ControlsLeft Side Front Side Remote sensor LoudspeakersRemote Control Distance of Remote Control Operation Remote ControlInstall the batteries Hdmi input See PC Monitor input PC See Antenna connectionPreparation Call Menu and for example Select Auto TuningQuick guide for MENU-operation Teletext Language Selection On-screen Language SelectionSelect Language Then press Select Text Language Then press To select West or EastPress Automatic station presetting with the built-in TunerSystem Change the order of stored channel Press To select PAL or SECAM-L Then press Enter Manual TV station presettingScart-cable not supplied Connection to Satellite ReceiverPlasma television Channel selection Basic OperationTimer functions Nicam stereo sound reception Stereo reception with the built-in tunerSelect Nicam Press Select OFF if you want no NICAM-receptionStereo reception with the built-in tuner Bass, Treble and Balance Select BASS. Then press or to adjust the bassTurning off the built-in speakers Selecting the BBE/Turning off the built-in speakersSelecting the BBE Brightness, Contrast, Colour and Sharpness Brightness, Contrast, Colour and Sharpness/DNRSelect BRIGHTNESS. Then press Select DNR. Then pressSelecting the color temperature Selecting the color temperature/Blue backMode Picture Quality Blue backPicture format Manual format setting169 149Auto 43 Default Scrolling the CINEMA-Wide picture/Auto 43 DefaultScrolling the CINEMA-wide picture Or FullFull White Full White/Screen Saver/Static ImageScreen Saver Static ImageTo unlock the panel Using the panel lock featureTo change password Select PC input PC-SettingPress To select CONTRAST. Then PC-SettingPicture Menu Brightness and Contrast can be set as you Audio MenuHdmi cable type a connector Not supplied Connecting an Hdmi or a DVI device to the Hdmi inputSelecting the Hdmi audio input source SuppliedTeletext Switch on / off TeletextTOPtext SelectTeletext Conceal stored channels Cancel Concealment of ChannelsConnect with various unit DVD playerSetting of Scart socket AV2 Connecting an audio systemConnection to other equipment Connect to a Video camera or Video playerPress Menu, select AV Colour AV-Color adjustingConnect with another equipment See pages 35 Specifications Troubleshooting table / SpecificationsTroubleshooting table 3U84011A E P35-BACK 20/12/05 J3U84011A SH 06/02