Pirelli DP-L10 manual Wlan settings, Select Wlan Profile

Chapter

8.2WLAN settings

To use the Dual mode phone, you can use different WLAN profiles. To setup the profile with security rule used, the corresponding WLAN-AP (access point) information should be given. When you are in the WLAN area and have a predefined profile, select the profile, DP-L10 will register to the WLAN automatically.

8.2.1 Select WLAN Profile

Before you set the access to WLAN network, select a profile, and check if the profile is set and active.

A WLAN network can be added either when the network is detected (the Network Indicator icon is showing in the idle screen) or manually by entering setting information.

1.Press OK key (Menu) > Scroll down key (WLAN) > OK key

> Scroll down key (WLAN Settings)

2.Press OK key (Active settings) to select a profile

All Profile: The submenu set the All Profile from Active settings.

Information:

Use this profile only when you want DP-L10 to select the profile automatically. When you want to set one profile for one AP, do not select the profile (All profile).

-Home: when you set a WLAN in house, use this profile and save the Home-WLAN info.

-Office: when you set a WLAN in office, use this profile and save the Office-WLAN info.

-Hotspot: Set the WLAN in the Hotspot when you have the operator of the Hotspot.

-Profile 4 to 5: you can still take 2 more profile in use. Press OK key.

You can change the profile title/name, read the Chapter WLAN Profile Rename.

75

8