2

Chapter

2.2Signal bar

Signal bar indicates the strength of the received signals. It is represented with 6 levels. (GSM/WLAN) GSM at left side, WLAN at right side. At the bottom of

each signal bar, an icon marked with either G ( ) or W ( ) indicates the

current active network. An active network is the network that the next outgoing call will go through. It also means that the phone will smartly decide which network should be “active” depending on the strength of the signal and the preference of the network set by the user.

WLAN active

GSM active

2.3Mobile operator name and WLAN network name

Operator and WLAN network name will both display in the idle mode when user selects GSM preferred or WLAN preferred in Settings/Preferred network.

In WLAN preferred mode, the WLAN network name will be shown above the GSM operator name. The “active” network will be shown in boldface.

In GSM preferred mode, the GSM operator name will be shown above the WLAN network name. The “active” network will be shown in boldface.

34

Page 34
Image 34
Pirelli DP-L10 manual Signal bar, Mobile operator name and Wlan network name