Pirelli DP-L10 manual Dial Voice Mail, Set Voice Mail

5

Chapter

Out (SMTP) port: TCP port of the mail server – default = 25

In (POP3) port: TCP port of the mail server – default = 110

Reply-to address

Retrive e-mails (default = 10)

Data bearer: ‘GPRS’ enables connection over GPRS; ‘WLAN only’enables connection over WLAN

Bearer settings

Access point

Authentication type (‘Normal’ or ‘Secure’)

Username (input only if ‘Secure’ authentication type is selected)

Password (input only if ‘Secure’ authentication type is selected))

SMPT Connection settings

POP3 Connection settings

Warning:

the E-mail may contain virus or other elements that will be harmful to your PC or cellular phone, if you do not certain the sender’s identity, please do not open the accessories.

5.4Voice Mail

Your service provider will provide you with a voice mailbox if you subscribe to this specific service. When a voice message is received, your phone will notify you by beeping, displaying a message on the idle screen, or both.

5.4.1 Dial Voice Mail

Your service provider may have already saved your voice mailbox number to your phone and notified you when you first subscribed. If so, dial the assigned number to listen to the voice message in idle mode. Or select Menu >

Message > Voice Mail > Dial Voice Mail and press OK key to check.

5.4.2 Set Voice Mail

Default short cut for accessing the voice mail is long press on . After entering into this function, dial the number that your service provider set for

64