Q-See QS4474 user manual Remote Control, Name/Symbol Function

3.2 REMOTE CONTROL

The buttons on the Remote Control operate in the same manner as on a conventional DVR remote. Some buttons have multiple functions depending on which menu is being accessed.

#	Name/Symbol	Function
1	STANDBY	Press to turn standby mode ON/OFF.
2	LOGIN/LOCK	If “Security” has been enabled in the Setup menu,
		press to open the user password login screen.
3	Number/Channel buttons	While in menus, press buttons 0~9 to enter values;
		during live viewing, press to view channels full-screen.
4		Press to switch between quad and full-screen
		displays.
5	MENU	Opens the main menu.
6	PTZ	Press to open the PTZ control window.
7	EXIT	Close menu windows.
8	Navigation/OK:
	/CH+	Move cursor in menus up; Channel Up.
	/FWD	Move cursor in menus to the right
	/REW	Move cursor in menus left
	/CH-	Move cursor in menus down; Channel down.
	OK	In menus, press to confirm selections; during
		playback and preview, press to view system
		information

9+/ - : In menus, press to adjust values.

10RECORD: Press to start manual recording.

11STOP: Press to stop manual recording.

12EXTRA: For future use.

13Playback controls:

Increase reverse playback speed 2X, 4X, 8X

Press to start playback

Press to increase forward playback speed 2X, 4X, 8X

Press to slow playback speed by 1/2, 1/4, 1/8

Press to freeze playback to one frame, then press again to advance frame-by-frame

TIP: When using the remote control to enter password and camera titles, select the field using the navigation buttons, press ENTER, and then press the number buttons.

CHAPTER 3 CONTROLS

PICTURE 3-3

24 25