Q-See QSC26404 Record type, Copy to other days, Save, Setup time period and record type

Page 56

QSC26404 User’s Manual

Step 3: Record type

For “Rec Type”, the options are: All Time, Motion Detect, Alarm, MotionAlarm, and Motion&Alarm, command.

For all day record mode, only one record type can be selected.

Step 4: Copy to other days

You can repeat step 2 and step 3 to setup for other days. Also you can copy the current day to other days.

Step 5: Save

Press “Confirm” to return to “Recording” menu. Press “Confirm” again to save the parameters and return to the main menu.

Part time recording setup

Step 1: Enter into recording schedule menu

In recording menu, use【ENTER】or【EDIT】key to enable record function (“” flag), press

“Schedule” button to enter into recording schedule menu.

Step 2: Select one day and disable all day recording option

For “Day”, the options are: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and

Sunday. Use【↑】【↓】keys to select a day. Move the “Active Frame” to the check box on the right

side of “All Day”, press【ENTER】or【EDIT】key to disable “All Day” option. “×” means disabled

and “” means enabled.

Step 3: Setup time period and record type

There are 4 time periods for one day, and each time period can select a different record type. Input start time and stop time for each time period, and select record type for each period. The record type options are: All Time, Motion Detect, Alarm, Motion&Alarm and MotionAlarm, command.

Note: The time periods in one day can not be repeated.

Step 4: Copy to other days

You can repeat step 2 and step 3 to setup for other days. Also you can copy the current day to other days.

Step 5: Save

Press “Confirm” to return to the “Recording” menu. Press “Confirm” again to save the parameters and return to the main menu.

Note:

1)If record type is “Motion Detect” or other related type, you must setup “Motion Detection” in order to trigger motion recording (refer to Chapter 5.10).

2)If record type is “Alarm” or other related type, you must setup “Alarms” in order to trigger alarm recording (refer to Chapter 5.13).

3)The time period is between 00:00—24:00.

56

Image 56

Contents QSC26404 Net DVR V2.1 Index Chapter Appendix D Website Customer Service Product Introduction Storage FunctionsOthers Preview & Playback FunctionsNetwork Functions Hard Drive HDD Installation InstallationChecking the DVR and Its Accessories Rear Panel Description QSC26404 Rear PanelIndex Type Name Description Operational InstructionsFront Panel Shift IR Remote Control Index Name DescriptionLoading the Batteries Into the Remote Control Starting the Remote ControlDisabling the Remote Control Powering Down the DVRMenu Description Menu Items Main Menu Description How to Enter Into Menu ModeMenu Operation QSC26404 User’s Manual How to Exit Menu Input TextBasic Operation Guide Power On PreviewRecording status Form 4-1 Camera record status Icon Icon Color Status DescriptionAlarm status Change Password User Name and PasswordLogin QSC26404 User’s Manual PTZ Pan, Tilt, Zoom Control PTZ Control InterfacePTZ Control Keys Description Adjust Preset DescriptionSelect Channel Manual Record Start/Stop Auto in PTZ Control ModeExit PTZ Control Mode Playback DescriptionDescription QSC26404 User’s Manual Playback With Mouse Attached Control Bar FunctionsBackup Recorded Files Backup Daily Recorded FilesSelect backup device Shutting Down the DVR Playback the video segmentPassword Modification Parameters Setup GuideAdministrator and Password User management Enter into User Management menu shown in fig Add and Delete UsersAdd User Setup the password for new user Add new user nameSetup the rights for new user Save the new user’s password and rightsUser rights description Local Remote through network or internetMAC Address Delete UserUnit Name and Device ID Unit NameVideo Output Standard and VGA Setup VGA setupDevice ID Video Output StandardCamera Name Camera Name PositionMM DD YY MM DD YY YY MM DD System TimeVideo Parameters Setup Date OSD Position12 Color setup Mask Area Setup Disabling the mask check box cancels the mask area View Tampering Alarm Enter into Camera menuVideo Loss Alarm 【ESC】key to abort Motion Detection Interface shown as figClear motion area QSC26404 User’s Manual Preview Properties Preview properties Recording Setup Recording menu descriptionBit Rate Type All day recording setup Enter into recording schedule menuSelect a day and enable all day recording option Select one day and disable all day recording option Setup time period and record typeRecord type Copy to other daysExternal Alarm Input and Relay Output External alarm input setupAlarm type Enter into Alarm in Handling sub menuAlarm trigger record channel setup Schedule for alarm handle methodAlarm handle method Save setupPTZ Linkage Alarm relay output setup Select delay timeEnter into alarm out schedule Setup alarm out scheduleExceptions Network Parameters Network menu descriptionAdvanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ Pan, Tilt, Zoom PTZ menu descriptionPreset setup Sequence setup Cruise setup Restore Parameters UtilitiesUpgrade Stop Alarm Out RebootPower Off Hard Disk ManagementView Log By TypeBy Type&Date For example The steps of viewing alarm logBy Time System Information Firmware Upgrade FTP Server SetupSetup username Upgrade Mode Drag the left key Single click the left keyRight click MovingClick the right key Scroll wheel forwardAppendix B HDD Capacity Calculation = d i ⎟ 8⋅ 3600 ⎟1024RJ45 introduction Pin definition Appendix C DVR Connect Cable DefinitionMaterial and tool QSC26404 User’s Manual Appendix D Specifications Model Name QSC26404Appendix E Troubleshooting Failure Possible reasonsAppendix F Product Service & Warranty Appendix G Customer Information Card Website Customer Service