Q-See QSC26404 user manual Checking the DVR and Its Accessories, Hard Drive HDD Installation

Page 7

QSC26404 User’s Manual

Chapter 2: Installation

Warning: Before you install the DVR, please make sure the power to the DVR is switched off.

2.1 Checking the DVR and Its Accessories

When you get the product, check that all the items are included in your product package. There is a list in the package. If any of the items are missing, please contact your dealer.

2.2 Hard Drive (HDD) Installation

Installation Notice

The DVR does not have a HDD when leaving the factory. Based on the recording schedule, you can calculate the total capacity you need (refer to Appendix A). Please have a qualified technician disassemble the DVR and install the HDD.

Note: Many retailers that include this DVR as part of a bundled package include a hard drive, so your unit may already have one installed as part of the package. If so, these steps are not necessary.

Installation Tools

One Phillips screw driver.

HDD Installation

1.Remove the DVR box lid.

2.Place the HDD on the mounting plate.

3.Connect the ATA data cable correctly. The cable has three connectors for DVR main board, master HDD and slave HDD.

4.Plug in the HDD power connector.

5.Replace and reattach the DVR box lid.

Note: After the HDD is installed, it must be formatted. Please refer to Chapter 6.4.

7

Image 7

Contents QSC26404 Net DVR V2.1 Index Chapter Appendix D Website Customer Service Storage Functions Product IntroductionNetwork Functions Preview & Playback FunctionsOthers Checking the DVR and Its Accessories InstallationHard Drive HDD Installation QSC26404 Rear Panel Rear Panel DescriptionFront Panel Operational InstructionsIndex Type Name Description Shift Index Name Description IR Remote ControlPowering Down the DVR Loading the Batteries Into the Remote ControlStarting the Remote Control Disabling the Remote ControlMenu Description Menu Items Menu Operation How to Enter Into Menu ModeMain Menu Description QSC26404 User’s Manual Input Text How to Exit MenuPreview Basic Operation Guide Power OnIcon Icon Color Status Description Recording status Form 4-1 Camera record statusAlarm status Login User Name and PasswordChange Password QSC26404 User’s Manual PTZ Control Interface PTZ Pan, Tilt, Zoom ControlSelect Channel Adjust Preset DescriptionPTZ Control Keys Description Exit PTZ Control Mode Start/Stop Auto in PTZ Control ModeManual Record Description PlaybackDescription QSC26404 User’s Manual Control Bar Functions Playback With Mouse AttachedBackup Daily Recorded Files Backup Recorded FilesSelect backup device Playback the video segment Shutting Down the DVRAdministrator and Password Parameters Setup GuidePassword Modification User management Add User Add and Delete UsersEnter into User Management menu shown in fig Add new user name Setup the password for new userSave the new user’s password and rights Setup the rights for new userDelete User User rights description LocalRemote through network or internet MAC AddressUnit Name Unit Name and Device IDVideo Output Standard Video Output Standard and VGA SetupVGA setup Device IDCamera Name Position Camera NameSystem Time MM DD YY MM DD YY YY MM DDDate OSD Position Video Parameters Setup12 Color setup Mask Area Setup Disabling the mask check box cancels the mask area Enter into Camera menu View Tampering AlarmVideo Loss Alarm 【ESC】key to abort Interface shown as fig Motion DetectionClear motion area QSC26404 User’s Manual Preview Properties Preview properties Recording menu description Recording SetupSelect a day and enable all day recording option All day recording setup Enter into recording schedule menuBit Rate Type Copy to other days Select one day and disable all day recording optionSetup time period and record type Record typeEnter into Alarm in Handling sub menu External Alarm Input and Relay OutputExternal alarm input setup Alarm typeSave setup Alarm trigger record channel setupSchedule for alarm handle method Alarm handle methodPTZ Linkage Setup alarm out schedule Alarm relay output setupSelect delay time Enter into alarm out scheduleExceptions Network menu description Network ParametersAdvanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ menu description PTZ Pan, Tilt, ZoomPreset setup Sequence setup Cruise setup Utilities Restore ParametersUpgrade Hard Disk Management Stop Alarm OutReboot Power OffBy Type View LogBy Time For example The steps of viewing alarm logBy Type&Date System Information FTP Server Setup Firmware UpgradeSetup username Upgrade Mode Moving Drag the left keySingle click the left key Right clickScroll wheel forward Click the right key= d i ⎟ 8⋅ 3600 ⎟1024 Appendix B HDD Capacity CalculationMaterial and tool Appendix C DVR Connect Cable DefinitionRJ45 introduction Pin definition QSC26404 User’s Manual Model Name QSC26404 Appendix D SpecificationsFailure Possible reasons Appendix E TroubleshootingAppendix F Product Service & Warranty Appendix G Customer Information Card Website Customer Service