Q-See QSC26404 user manual Basic Operation Guide Power On, Preview

Page 17

QSC26404 User’s Manual

Chapter 4: Basic Operation Guide

4.1Power On

Note: Please make sure the power supply is the correct one for the DVR and the AC adapter is connected correctly. Before switching DVR on, please connect one monitor to VOUT or VGA interface, otherwise you can not see graphic user interface and can not operate the DVR.

If【POWER】light is off, please do the following:

Step1: Re-connect power cable;

Step2: Switch on the power button on the rear panel.

If【POWER】light is red, just press【POWER】button to start DVR.

When DVR is started,【POWER】light is green. On the monitor or VGA display, DSP and HDD initialization process will be shown.

The first line represents DSP initialization. If the DSP icon is “×”, it means there is a DSP initialization error, please contact administrator at once.

The second line represents HDD initialization. If the HDD icon is “×”, it means

the HDD is not installed or not detected. If HDD is not detected, please contact administrator.

Note: If HDD is not installed or not detected, DVR will beep an alarm. You can disable the beeping in the “alarm” menu ->”Exceptions” option.

4.2 Preview

DVR will enter into preview mode after it is started.

On preview screen, you can see date, time, camera name and camera status icon. Set system date and time in “Camera” → “Date OSD” menu, please refer to

Chapter 5.5;

Change camera name in “Camera” menu, please refer to Chapter 5.5

On the screen, it will display record and alarm status of each camera. As shown in fig 4.1, These two types of status will switch over automatically.

Press【A】key to display or hide the camera status bar.

17

Image 17

Contents QSC26404 Net DVR V2.1 Index Chapter Appendix D Website Customer Service Storage Functions Product IntroductionOthers Preview & Playback FunctionsNetwork Functions Hard Drive HDD Installation InstallationChecking the DVR and Its Accessories QSC26404 Rear Panel Rear Panel DescriptionIndex Type Name Description Operational InstructionsFront Panel Shift Index Name Description IR Remote ControlStarting the Remote Control Loading the Batteries Into the Remote ControlDisabling the Remote Control Powering Down the DVRMenu Description Menu Items Main Menu Description How to Enter Into Menu ModeMenu Operation QSC26404 User’s Manual Input Text How to Exit MenuPreview Basic Operation Guide Power OnIcon Icon Color Status Description Recording status Form 4-1 Camera record statusAlarm status Change Password User Name and PasswordLogin QSC26404 User’s Manual PTZ Control Interface PTZ Pan, Tilt, Zoom ControlPTZ Control Keys Description Adjust Preset DescriptionSelect Channel Manual Record Start/Stop Auto in PTZ Control ModeExit PTZ Control Mode Description PlaybackDescription QSC26404 User’s Manual Control Bar Functions Playback With Mouse AttachedBackup Daily Recorded Files Backup Recorded FilesSelect backup device Playback the video segment Shutting Down the DVRPassword Modification Parameters Setup GuideAdministrator and Password User management Enter into User Management menu shown in fig Add and Delete UsersAdd User Add new user name Setup the password for new userSave the new user’s password and rights Setup the rights for new userRemote through network or internet User rights description LocalMAC Address Delete UserUnit Name Unit Name and Device IDVGA setup Video Output Standard and VGA SetupDevice ID Video Output StandardCamera Name Position Camera NameSystem Time MM DD YY MM DD YY YY MM DDDate OSD Position Video Parameters Setup12 Color setup Mask Area Setup Disabling the mask check box cancels the mask area Enter into Camera menu View Tampering AlarmVideo Loss Alarm 【ESC】key to abort Interface shown as fig Motion DetectionClear motion area QSC26404 User’s Manual Preview Properties Preview properties Recording menu description Recording SetupBit Rate Type All day recording setup Enter into recording schedule menuSelect a day and enable all day recording option Setup time period and record type Select one day and disable all day recording optionRecord type Copy to other daysExternal alarm input setup External Alarm Input and Relay OutputAlarm type Enter into Alarm in Handling sub menuSchedule for alarm handle method Alarm trigger record channel setupAlarm handle method Save setupPTZ Linkage Select delay time Alarm relay output setupEnter into alarm out schedule Setup alarm out scheduleExceptions Network menu description Network ParametersAdvanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ menu description PTZ Pan, Tilt, ZoomPreset setup Sequence setup Cruise setup Utilities Restore ParametersUpgrade Reboot Stop Alarm OutPower Off Hard Disk ManagementBy Type View LogBy Type&Date For example The steps of viewing alarm logBy Time System Information FTP Server Setup Firmware UpgradeSetup username Upgrade Mode Single click the left key Drag the left keyRight click MovingScroll wheel forward Click the right key= d i ⎟ 8⋅ 3600 ⎟1024 Appendix B HDD Capacity CalculationRJ45 introduction Pin definition Appendix C DVR Connect Cable DefinitionMaterial and tool QSC26404 User’s Manual Model Name QSC26404 Appendix D SpecificationsFailure Possible reasons Appendix E TroubleshootingAppendix F Product Service & Warranty Appendix G Customer Information Card Website Customer Service