Q-See QR404 user manual Main Menu, Camera Setup

5.2: Main Menu

(Picture 4)

5.2.1: Camera Setup

(Picture 5)

(Picture 5A)

The right-click menu in the Main Interface mode (Picture 3) allows you to access the Main Menu interface (Picture 4). You can use the right click function of the mouse or the Menu button on the front panel of the DVR to enter into the Main Menu interface. Use the mouse or the FWD and REW button on your DVR’s front panel or remote control to navigate around the Main Menu Interface and select the icon of the program you wish to access (See Picture 4). Use the ESC button on your DVR’s front panel to return to the previous window of the Main Menu interface. Set your management permissions, configure your devices, customize your recording parameters, and access your System Functions (such as time, date and passwords) through the Main Menu Interface. You can also configure the controls for your Camera, Network, HDD, Alarm, PTZ, & Mobile Phone controls through the Main Menu Interface.

To set up the display name and position display of each camera, go to [Main Menu  Camera] and you will receive a Camera Setup interface (Shown as Picture 5). Through the Camera Setup interface, you are able to choose a name for each of your connected cameras up to 8 characters long. The Camera Setup interface (Picture 5) also gives you the ability to choose which camera channels you wish to enable live viewing of and which camera channels you wish to set up with the ability to record. The Camera Setup interface is also where you would set your DVR system up to automatically rotate through your camera views and adjust the image brightness, saturation, contrast and hue settings of each camera as well.

To set your system up to automatically rotate through your viewed cameras in the Camera Setup interface, click on the [AUTOSEQ] button (Picture 5). This will initiate a pop up AUTO ROTATION sub menu (Picture 5A) that will allow you to choose the amount of time you would like to view each camera from a drop-down list. Default rotation time is set at 5 Seconds. However, you can adjust this setting to range anywhere from 0 to 10 Seconds.

To adjust the image brightness, saturation, contrast and hue settings of each camera, click on the [SETUP] button under the column titled “COLOR” on the Camera Setup interface (Picture 5). This will initiate a pop-up [COLOR SETUP] sub menu where you can make your desired changes (Picture 5B).