Q-See QR404 user manual PTZ Setup

QR404 User Manual

•The EMAIL SETUP button allows you to configure your system to send you an email when motion has been detected by your system. To configure your email notification settings, click on the EMAIL SETUP button and you will generate an EMAIL SETUP interface as illustrated in Picture 35. In the EMAIL SETUP interface, choose the ON option in the pull down menu. Choosing the “On” option will generate list of options to choose from to customize your SSL, SMTP PORT, SMTP server, Send and Deliver Servers and your email account password. (Picture 36). Your SSL button turned to “On:” will allow an extra layer of protection to keep your email account and password from being hacked.

(Picture 35) (Picture 36)

You can obtain the correct settings for your SMTP server and the SSL configuration of your mailbox at your mail server’s website (such as G-Mail, Yahoo, or others). Brief explanations of the information you need to obtain from your Email server are as follows:

SMTP Port: indicates sender port of SMTP server. Generally the SMTP port value is 25. There are exceptions however and you should check with your Email server’s website.

SMTP Server: indicates server address you use.

Sender Email: indicates sender’s email address. The email address should be consistent with the server you use. That is to say, when you use email address – aaa@gmail.com, the according server should be smtp.gmail.com.

Receiver Address: indicates receiver’s email address. The email address is used to receive image transmitted from motion detection alarm of DVR. Please clear the images you have received as soon as possible to avoid overloading your email account.

5.2.7.3: PTZ Setup

	Clicking on the PTZ Setup icon in the Device Management interface
	(Picture 32) will allow you to configure your PTZ settings. Once
	you click on the icon a pop up PTZ Setup interface as illustrated in
	Picture 37 will appear. Select the channel you want to control in
	the top row of the PTZ interface screen and set the PTZ protocol
	from the protocol drop-down menu (Pelco-D or Pelco-P); the Baud
	Rate from the baud rate drop down menu (1200, 2400, 4800 or
	9600); the Stop Bit rate from the stop bit drop down menu (1 or 2);
	the Parity Check from the parity drop down menu (None, Odd or
(Picture 37)	Even Mark Space); and the Address Code and Cruise status
	accordingly. Please note the above mentioned channel settings
	must match the settings of the PTZ camera.

21