Q-See QR404 user manual Recorded File Menu Commands

QR404 User Manual

•Date is depicted in upper right hand corner as illustrated in Picture 27. Date represents the date current file selection was recorded.

•The 24H recorded time line under the Date represents the time line base for recorded material.

•The 0~60 Minute recording time quantum represents the minute base for all recorded materials. As depicted in Picture 30, the green bar represents the time length of the recorded material in the file you are currently playing.

Recorded File Menu Commands

(Figure 1)

Video Play Settings: In your Multimedia player interface, got to the Setting menu on your toolbar. From there, go to Video Play SettingNormal Video Bar (Picture 28). This will open up a dialog as illustrated in Picture 29 allowing you to choose from a drop down list of which channels to play. Make your choice from the options provided in the drop down list and click next to “Play the Video”. Click Apply then OK.

Audio Settings: In your Multimedia player interface, go to the Setting menu on your toolbar. From there, go to SettingAudio Channel SettingNormal Video Bar (Picture 30). This will open up a dialog as illustrated in Picture 31 allowing you to choose from a drop down list of which audio channels to play. Make your choice from the options provided in the drop down list and click next to “The channel has sound data”. Click Apply then OK. Please note that these setting changes will not take effect until you re-start your multimedia player.

18